Perfect size Campaign box for Marvel Champions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Campaign boxes to store all the cards of a Marvel Champions campaign for easy handling and set up.
- Ocena
- 5 / 5
- Polubienia
- 5
- Pobrania
- 32
- Wydruki
- 1
- Wyświetlenia
- 465
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial
Up until now I’d been storing all my Marvel Champions printed content in two big boxes: one for hero cards and another for campaigns and scenarios. The campaign box was already huge, and setting up a game was a pain — heavy as hell, needed a ton of space, and I had to move the campaign cards somewhere else while actually playing… so yeah, not great. Eventually I decided to design and 3D-print my own campaign boxes.
They’re made to hold a full campaign sleeved in premium sleeves, take up as little shelf space as possible, and use thin walls so they don’t waste filament either. For the dividers, I used toploaders trimmed slightly on one side, which keeps the cards snug without too much wiggle room inside the box. The credit for the dividers goes for Dividers Central, the best dividers for Marvel Champions out there!
On the front there’s a slot for a label or a print showing what cards are inside. What I did was print a campaign image on paper and stick a cut piece of a toploader in front of it, so it looks clean and finished. The size of the prints and the toploader window is 70×50 mm.