1 / 1
Petal lighting stacker fixture — zdjęcie 1

Petal lighting stacker fixture

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

My version of the petal lighting stacker fixture

Ocena
0 / 5
Polubienia
3
Pobrania
16
Wydruki
0
Wyświetlenia
109
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Gadgets
Licencja
Creative Commons — Public Domain

Description is a work in progress please bear with me as I write out instructions.

These parts are my own take on the stacker fixture by the petal lighting project.  It uses a xlr connector in the base and allows the fixture to be mounted on a cross floor stand.

Each fixture requires:

5 x Part 1 (Insert for the metal extrusion)

1 x Part 2 (Top cap)

1 x Part 3 (Bottom mount) (Needs to be split to parts)

2 x Part 4 (Curved insert for metal extrusion for the led strip to be attached to)

1 x Part 5 (Tube joiner) (Needs to be split to parts)

Information about the parts:

Part 1 and 4 have 3 holes for m3 nuts to be inserted into these allow the rest of the parts to be securely attached to the metal extrusion on the tubes.

Part 3 has a faceplate that fits a Neutrik NC3 MAV xlr connector as well as a cover which fits over the hole needed to fit the connector into the part.

How to assemble:

Insert m3 nuts into almost every hexagonal hole in the printed parts (31 total) the inner bits of part 5 have a spot in the middle that doesn't require them.