1 / 1
Petal lighting stacker fixture — image 1

Petal lighting stacker fixture

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

My version of the petal lighting stacker fixture

Rating
0 / 5
Likes
3
Downloads
16
Makes
0
Views
109
Reviews
0

Updated at source:

Model information

License
Creative Commons — Public Domain

Description is a work in progress please bear with me as I write out instructions.

These parts are my own take on the stacker fixture by the petal lighting project.  It uses a xlr connector in the base and allows the fixture to be mounted on a cross floor stand.

Each fixture requires:

5 x Part 1 (Insert for the metal extrusion)

1 x Part 2 (Top cap)

1 x Part 3 (Bottom mount) (Needs to be split to parts)

2 x Part 4 (Curved insert for metal extrusion for the led strip to be attached to)

1 x Part 5 (Tube joiner) (Needs to be split to parts)

Information about the parts:

Part 1 and 4 have 3 holes for m3 nuts to be inserted into these allow the rest of the parts to be securely attached to the metal extrusion on the tubes.

Part 3 has a faceplate that fits a Neutrik NC3 MAV xlr connector as well as a cover which fits over the hole needed to fit the connector into the part.

How to assemble:

Insert m3 nuts into almost every hexagonal hole in the printed parts (31 total) the inner bits of part 5 have a spot in the middle that doesn't require them.