1 / 2
IKEA CITRONHAJ Spice Jar Holder (2×4) - Drawer / Shelf Organizer — zdjęcie 1
1 / 2

IKEA CITRONHAJ Spice Jar Holder (2×4) - Drawer / Shelf Organizer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

8-slot (2×4) IKEA CITRONHAJ spice jar (10cl version) organizer for drawers and shelves - no supports.

Ocena
0 / 5
Polubienia
24
Pobrania
101
Wydruki
0
Wyświetlenia
498
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

A compact organizer designed specifically for IKEA CITRONHAJ spice jars.
It stores 8 jars total in a 2×4 grid, keeping labels facing forward and preventing jars from rolling around in a drawer.

This is the 10cl version!
You can find the version for the 2x2 35cl IKEA CITRONHAJ here!

If you need any other size, please let me know in the comments!

This is a free‑standing holder (no screws, no magnets) - just place it in a drawer or on a shelf and load it up.

Size / Fit

  • Holder size (empty): 158 mm (height) × 99 mm (width) x 100 mm (depth

  • Height when fully loaded with jars: ~195 mm (good to know for drawer clearance)

Features

  • Made for CITRONHAJ jars for a clean, consistent look

  • Compact 2×4 layout with easy access to each jar

  • Drawer-friendly: keeps everything aligned and tidy

  • Simple print with a minimal, modern design

Print settings (recommended)

  • Layer height: 0.20 mm

  • Perimeters/Walls: 3

  • Infill: ~5% (Gyroid / Grid)

  • Supports: None

  • Orientation: print with the back side facing down on the build plate

  • Ironing: ON (for a cleaner top surface finish)

  • Brim: optional (only if you need extra bed adhesion)

Material notes

  • PLA: best for indoor use in a closed space (drawer/cabinet).

  • PETG/ASA: recommended if the holder may be exposed to direct sunlight or higher temperatures.

Notes

  • Printer tolerances vary; if the fit is slightly tight/loose, try ±1–2% scaling.

Tagi