1 / 1
1U 19" Rack mount for Thinkcenter M720q, JetKVM and CM4 Compute Blades — zdjęcie 1

1U 19" Rack mount for Thinkcenter M720q, JetKVM and CM4 Compute Blades

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple rack mount for a M710Q series Thinkcenter, JetKVM and CM Compute Blades for 1U 19" racks

Ocena
0 / 5
Polubienia
7
Pobrania
22
Wydruki
0
Wyświetlenia
460
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

This is a simple 1U mount for a 19" rack, a ThinkCentre M720q and similar models, a JetKVM, two Ethernet plugs and four Compute Blades with rear fan.

The system is held together by two M6*50 screws with matching nuts and a reinforcement to be glued to the rear, which also allows cables to pass through.

I suggest printing it in ASA or PC given its weight and temperatures, especially if nothing is placed underneath to support the weight.

Project designed by Phil3D on behalf of the Klinkon Electronics laboratory.

Tagi