ERCT filament buffer mounting bracket for 2020 extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bracket to mount an ERCT filament buffer onto 2020 extrusion at the right height to feed an ERCFv3 mounted onto the same
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 45
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The ERCT filament buffer option for the ERCFv2 had not been updated for the ERCFv3 at the time I built mine. In the original the mounting brackets bolted onto the 2020 extrusion that is part of the ERCFv2, but to work with the ERCFv3 I needed the buffer mounted higher and further away from the feeder. So I designed this version of the bracket to build a working ERCFv3 with ERCT buffer. In the photos you can see the way I mounted my ERCFv3 on a pair of parallel lengths of 2020 extrusion, and these brackets are holding the ERCT in place on the rear length of 2020. You have to slide these brackets onto the 2020 extrusion from the end, they cannot be clipped onto the middle of some extrusion. I have included a STEP file if you want to modify these for your own needs.