1 / 2
STREBITO Mini HSW Holder — zdjęcie 1
1 / 2

STREBITO Mini HSW Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Mount for STREBITO Mini electric screwdriver using the Honeycomb storage wall

Ocena
5 / 5
Polubienia
3
Pobrania
27
Wydruki
1
Wyświetlenia
124
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial

This is a holder for the STREBITO Mini Electric Screwdriver Set found on Amazon at the link below. The holder has a hole for charging while it is inside the case and mounted to the wall. If you want to move the hole to the other side, mirror the model in your slicer. 

https://a.co/d/gb723F1

Other requirements:

Uses 2 of the M3 mounts with 2 M3 x 8 screws to attach it to the wall - re uploaded in the downloads section for ease.

Hardware:

(2) - M3 Nuts - for the mounts found on the original HSW page

(2) - M3 x 8 Screws - any M3 from 6mm long to 10mm long should work fine. Model is counterbored for SHCS's. 

Printing settings:

Print in position, no supports needed. 

0.2mm layer height

3 perimeters

20% infill

3 top/bottom layers

Onshape link:

https://cad.onshape.com/documents/962b836879a8efc1561f20f4/w/70287d379adea227f308b326/e/7a13c26e14ace279d69d2a63?renderMode=0&uiState=69659f0acb8e313a3af39843

Tagi