STREBITO Mini HSW Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount for STREBITO Mini electric screwdriver using the Honeycomb storage wall
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 27
- Makes
- 1
- Views
- 124
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial
This is a holder for the STREBITO Mini Electric Screwdriver Set found on Amazon at the link below. The holder has a hole for charging while it is inside the case and mounted to the wall. If you want to move the hole to the other side, mirror the model in your slicer.
Other requirements:
Uses 2 of the M3 mounts with 2 M3 x 8 screws to attach it to the wall - re uploaded in the downloads section for ease.
Hardware:
(2) - M3 Nuts - for the mounts found on the original HSW page
(2) - M3 x 8 Screws - any M3 from 6mm long to 10mm long should work fine. Model is counterbored for SHCS's.
Printing settings:
Print in position, no supports needed.
0.2mm layer height
3 perimeters
20% infill
3 top/bottom layers
Onshape link: