Feet and Caps for HD Shelving
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Feet and Caps to split Home Depot Heavy Duty Shelving (48" x 24" x 72")
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
I wanted wire rack shelving in my storage closet and needed wide (24") shelves. Home Depot has their HDX Heavy Duty shelving unit that is 48" x 24", but comes 72" high. Instead of screwing the legs together to make 72" high, I kept them split for two 36" high units. But I needed feet and caps for the exposed ends.
I needed to remove the threaded insert used to join the two halves. I sized the feet such that the index marks line up on both the original and new sections. However, it turns out the original "top" sections are a little longer than the bottom ones, so when you install them you'll find they will stick up two index marks higher than the original bottom sections. I put them in back. See the photos.
I printed with PLA with 50% infill and three walls. The fit is a little tight, but easily put in place with a couple of taps of a dead blow hammer.