1 / 5
Feet and Caps for HD Shelving — image 1
1 / 5

Feet and Caps for HD Shelving

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Feet and Caps to split Home Depot Heavy Duty Shelving (48" x 24" x 72")

Rating
0 / 5
Likes
1
Downloads
10
Makes
0
Views
61
Reviews
0

Updated at source:

Model information

Category
Garage
License
Creative Commons — Attribution — Noncommercial

I wanted wire rack shelving in my storage closet and needed wide (24") shelves.  Home Depot has their HDX Heavy Duty shelving unit that is 48" x 24", but comes 72" high.  Instead of screwing the legs together to make 72" high, I kept them split for two 36" high units.  But I needed feet and caps for the exposed ends.

I needed to remove the threaded insert used to join the two halves.  I sized the feet such that the index marks line up on both the original and new sections.  However, it turns out the original "top" sections are a little longer than the bottom ones, so when you install them you'll find they will stick up two index marks higher than the original bottom sections.  I put them in back. See the photos.

I printed with PLA with 50% infill and three walls.  The fit is a little tight, but easily put in place with a couple of taps of a dead blow hammer.

Tags