P
Printables
Modular Shelving System 001 - Two Drawers
Modifies the original 001 module to have two drawers instead of three.
Search results: shelving
Counting matching models…
P
Printables
Single rod closet wire shelving bracket (openscad)
The original model looked great when the other half saw it, and wanted some for the closet. After quickly realizing that our builder selection had only a single top support rod instead of 2, I closed off one in the slicer to test. Close…
P
Printables
Metal Shelving Feet V2 stackable
Simply added pegs and holes to use for stacking. probably best in petg but its all your choice
P
Printables
Anti-tip bracket for shelving rack
Safety bracket for reducing the risk of a shelving rack from tipping. The height on the shelves are adjustable by lifting the side edge pieces -- the bracket ensures that this cannot happen on the part than it is used to secure to the…
P
Printables
Shelving bracket
This is a replacement for a broken shelving bracket. The round post goes in the shelving unit at the desired height and the shelf rest on top of the bracket. Printed with 20% infill and support on build plate only.
P
Printables
Wire Shelving Hook for Can-Stacking Rings
A very simple hook to hold can-stacking rings. It fits over the back wire of the shelf, against the wall, and allows 8-10 rings to be held when not is use. The rings are from https://www.printables.com/model/390850-pineapple-ring-ring ,…
P
Printables
Filament Rack Shelving
I had this existing built-in shelving unit in my closet and decided to use it for filament storage. I looked, but couldn't find any existing spool rack brackets that would work for this space so I decided to design this myself. The rods…
P
Printables
Door Hanging Hardware for Wire Shelving
Door hanger and hooks to hang shelving on the back of a door. Makes hanging shelving (without drilling holes in the door) very easy. Use adhesive or command strips for the hooks to prevent the shelf from moving, while the over-door hooks…
P
Printables
US General Metal Shelving Post Cap (Flex or TPU only) (1.25x1.25 inch, 32x32 mm)
I made these so I don't impale myself on the sharp corners as I am using the shelving as a bench top. I think these shelves are sold under a lot of brand names or at least very similar ones are sold are so these may work for you as long…
P
Printables
Filament Guide Clip for Metal Shelving
Combined clip from spool holder by tempire and filament guide from ambientvoid. Using to pass filament from a spool on upper shelf to printer below. Tube accepts a 4mm OD PTFE tube or filament directly.
P
Printables
Game Case Holders for Shelving
A basic little Game Holder. I collect games and had just some basic wood planks as shelf, but I wanted to start storing Games on the shelfs instead. Whilst I could just have the games stacked up side by side with end holders, if I removed…
P
Printables
String Shelving Apple MagSafe Charger bracket
This bracket holds the Apple MagSafe charger and clips onto the side of the String Shelving System.
P
Printables
HSW Clip for Wire Shelving
HSW clip for wire shelving. Recommend print in PETG. Fits wire shelf with spacing ~29mm from top to bottom.
P
Printables
Spacer for metal shelving, for example Regalux.
I created this spacer to align my Regalux shelves. Spacer can be placed on top of each shelf, between them, to allow a regular alignmenmt. I printed in PETG, with supports.
P
Printables
Foot for Wire Shelving Rack
A simple foot for the bottom of a wire rack shelf. Tubing ID is 0.875" / OD roughly 25mm/1". Print in your choice of materials. Mine were printed in a 60D TPU. Use a rubber hammer to tap in to the pipe.
P
Printables
Parametric Hook for Wire Shelving
I've included two sample STLs for a hook that work on the wire shelving we have around our house. One set of shelves we have are about 24.5mm high and the top and bottom bars are about 5mm in diameter. The other set are 31.0mm and 6.3mm.…
P
Printables
NSF Shelving System Screw Plug
A simple threaded plug for the NSF Shelving System upright tubes. Print in your choice of materials - I printed in TPU 60D. Slot is in the top to screw it in tightly. Thread size is really odd - close to 15/16"-16.
P
Printables
Wire rack shelving clips
I looked in all the wrong places because I never found a clip I'd be satisfied with for wire racks and hanging stuff from the edge. These clip to the edge of the wire racks in my current and previous house, so I think they are standard…
P
Printables
Minimalist shelving Rack Lowes Mini Tote
Lowes Mini Tote shelving minimalist design. This snaps together and allows you to put two side by side and go tall as you want. Added a looser fit plus shorter single column and XBrace! You have to push these together with some decent…
P
Printables
Shelf Brackets for 20 x 20 mm Profiles and 18 mm Shelving Boards
I needed a custom-sized shelving unit, so I used 20x20 mm profiles and 18 mm thick boards. The design requires no supports and is optimized for PETG printing. In V2, I adjusted the top bracket for the upper board to achieve a cleaner…
P
Printables
Legs for making a standalone shelf from wire shelving
Legs to convert wire shelving into a small freestanding shelf. I needed a small plant stand to raise seed starting trays to catch additional sunlight. I had a piece of old wire shelving (1/8" diameter wire spaced 1" apart) so I cut down…
P
Printables
IKEA SANDSHULT Inspired Shelving Bracket
This is a strudy shelving bracket inspired by the Ikea SANDSHULT. It does not include their metal hardware so it cannot handle the same load!
P
Printables
Whalen 5-Shelf Steel Shelving Corner Bracket
This is a corner bracket that fits the Whalen 5-shelf non-industrial steel shelves found at Costco. I put this together with the idea of having a small plug strip available next to each of my printers to make it easier to plug in the…
P
Printables
.5" PVC Filament Spool Shelving System
I wanted something like the reprack shelving, but I wanted to work with PVC pipe due to its availability in my area. These brackets were created for .5" PVC, which describes its internal diameter. The bracket holes are 22mm in diameter,…
P
Printables
french cleat for shelving unit
This design aims to provide a french cleat for mounting stuff (in my case small speakers) to a shelving unit. If you wish to change the design in the openscad files, you'll need the following screw holes library:…
P
Printables
Additional modular shelving system
drawers with a different size. The mainframe is like the 005_main, but it takes only three by three drawers, which are now as high as the 001/ 002 drawers. There is a drawer for single separator and a double separator use and a drawer…
P
Printables
Another spool holder, fits on shelving rails (OpenSCAD)
# Spool support for a 3d printer spool. Designed to sit on shelving rails (mine are from homebase) Customisable to your needs via openscad I used 2x 608 bearings that I press fit in the roller and some 8mm threaded rod to go through it.…
P
Printables
Tablet stop for IKEA BROR shelving system
The IKEA Bror shelving system is super flimsy when not bolted to a wall (which is not always possible). Using it for a 3D printing enclosure is a popular choice, so we need things to secure it. One of those things is tablet stops to…
P
Printables
Adjustable shelving unit - replacement clips
Replacement clips for adjustable shelves. It seems the clips may be standardized so this model can likely be used for other similar makes/models of adjustable shelves. I got my shelf second-hand with missing clips so I am unsure what make…
P
Printables
Parametric Micro Shelving
Brian's Parametric Micro Shelving I created this thing when I needed to add a HDMI switch and a NETGEAR GS105NA 5-Port Gigabit Ethernet Network Switch to my multi-media set up. Space was in short supply where the devices were to be stored…
P
Printables
Cable clips for wire rack shelving
I'd love to have a real network rack. But I'm cheap, so I have wire rack shelving, like this: To make routing of ethernet cables a little cleaner, I created these quick and easy clips. Now my routed cables look like this: Use To use…
P
Printables
Tetris Display/Shelving units (completely customisable w/ Open/Closed Back Variants)
uses a 1mm chamfer on all sharp edges
P
Printables
Resin Shelving Leg
A leg for a resin shelving unit. Some come with little legs, I either lost them or the shelving unit never had any.
P
Printables
Boltless Shelving Container for Mayonnaise etc
I have many heavy duty boltless shelves in my garage and noticed that there is quite a bit of space along the vertical rods. So I have started my journey to create some bins that can connect to these. This is my first model and the…
P
Printables
PVC Pipe Filament Shelf for Rack Shelving
This design is for most rack systems with 36-38mm. I designed it to use ¾ PVC pipe and ½ PVC pipe. I also added a honey cone design to decrease the filament needed and increase strength. You will need for this design: 3/4" PVC Pipe or…
P
Printables
Shelving unit for component boxes
The main feature is that the shelves can be stopped at any location on the shaft, and you can print as many of them as you need, with different sizes too. The shaft is stackable, so it can go higher than 60 cm (that you can see in my…
P
Printables
Hook for Metal Shelving Unit with T-Profile
To organize my printing shelves, I've designed a small hook that fits into the T-Shaped mounting holes. The hook can hold tools like pliers, wire cutters or the HexScraper. The hook is compatible with Shelving Units (“Schwerlastregal”)…
P
Printables
Can Holder for Metal Shelving Unit with T-Profile
To organize my printing shelves, I've designed can holders that fits into the T-Shaped mounting holes. It can be used to hold Acetone, Isopropyl Alcohol or Air Cans. Available with an inner diameter of: 55mm 62mm 68mm The height is 50mm,…
P
Printables
Solder station shelving
I bought Ksger solder station, but don't have enough place to place all tools. So I decided to create stackable organizer. I published different parts of project and you are free to modify any of them.
P
Printables
Modular Shelving System - 008 With Two Drawers for Tamiya Paints
See differences compared to the original.
P
Printables
Modular Shelving System 001 - Two Drawers
Modifies the original 001 module to have two drawers instead of three.
P
Printables
Shelving Peg Extender
This is a simple extender for the ~5mm metal pegs commonly found in various shelving units. Over time, the shelf frame may expand or the peg hole may become worn, making these short pegs insufficient to hold the shelves securely. This…
P
Printables
Wall Control Mounts For wire shelving system
These mounts will allow you to attach your wall control panels to the end of a 18 inch modular wire shelving system, they use Shelf Lock Clips to hold them in place locking them to the bar. I have tested them on Regency, Trinity and…
P
Printables
6QT Shelving Bin Sleeves
These sleeves attach to shelf brackets so you can add 6qt bins for storage. Here is a list of what you might need: Shelf Standards . These hold the shelf brackets, the design is made for the double-row ones. The ClosetMaid, Project Source…
P
Printables
Snap-On Label Holder for Wire Shelving Rack
I wanted to label the various spaces on my Heavy Duty Metal Storage Shelving Rack in my home office. I've designed it to nicely hold Avery 8860 labels (1 in. x 2 5/8 in.) so I can easily 2D print nice clear labels on my ink jet printer,…
P
Printables
Simple shelving unit hook
Very simple yet useful! One of my first every models. I have been using 20 of these for multiple years now with even somewhat heavy objects hanging from them and none failing.
P
Printables
Hook for Ikea Fjallbo shelving unit
We wanted to hang some Christmas stockings on the Fjallbo shelving units we have, but didn't want to use some sticky substance to do it. This is the result. This was a quick design and print, with some attempt to get the weight to shift…
P
Printables
Filament Storage Bracket for Menard's Shelving
This filament rack bracket slots into the side of a Menard's Performax modular shelving end frame similar to the link below. You will need to print at least two. Additionally, two 7/8" diameter dowel rods are needed to span between them.…
P
Printables
Plastic shelving foot
Replacement foot for plastic home shelving Top outter diameter: 34mm Top inner diameter: 31mm I found other shelving feet on here but nothing which matched my dimensions, so hopefully this helps someone else too! I used this to turn my 1…
P
Printables
Amazon Basics Wire Shelving Snap-On Hook
Remixed the 25mm hook so it Snap-On to the wildly used Amazon Basics Wire Shelving
P
Printables
Feet for Plastic Shelving Units
I bought a Greenmade 5-Tier Utility Rack and only needed 4 of the tiers. This meant I had a shelf and four legs leftover. This foot allowed me to use the leftover parts with some amount of stability. I've uploaded one model which is a…
P
Printables
Feet for Plastic Shelving Units
I bought a Greenmade 5-Tier Utility Rack and only needed 4 of the tiers. This meant I had a shelf and four legs leftover. This foot allowed me to use the leftover parts with some amount of stability. I've uploaded one model which is a…
P
Printables
Heavy duty boltless shelving hook
Heavy-duty boltless shelf hooks for attaching tools to the sides of the shelf I made this for my shelf from Toom i don't know if this is a standardized system
P
Printables
Edsal / Muscle Rack Shelving Foot
Replacement feet for Muscle Rack / Edsal boltless rack shelving. Will fit many other brands as well. Wider and triangulated base makes shelves easier to move and retain their shape at the corners.
P
Printables
Wire Shelving PTFE Clip
Simple clip that can be used on wire racks. The clip supports 3 different positions for ptfe tubes, depending on the type and position of the spool. Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: No…
P
Printables
Furniture Shelving Pin
Pin / support for furniture shelving. Does the trick for most shelving types.
P
Printables
Labels for Modular Shelving System
I printed these with a 0.25mm nozzle and added a color change at the first layer with text/symbols. Layer height = 0.15mm. I will be adding more labels shortly but there are blank step files if you wish to create your own. I plan to add…
P
Printables
RepRack 20mm bracket for Twin Slot Shelving
I have based my design off of Rene's 20mm RepRack design, however I have adapted it to work with RB UK Twin Slot Shelving, which I previously purchased from Screwfix and already use extensively for shelving. It's a slightly tight fit but…
P
Printables
3-Hole Assorted Tool Holder For Kobalt Heavy Duty Shelving Post
I tried a few of the designs from the original maker (John S), the SD card holders worked great, the tool holders did not. Most of my tools were to large to fit, so I based it off of the SD card design and made larger holes that fit most…
P
Printables
2-Slot Assorted Tool Holder For Kobalt Heavy Duty Shelving Post
I tried a few of the designs from the original maker (John S), the SD card holders worked great, the tool holders did not. Most of my tools were to large to fit, so I based it off of the SD card design and made larger holes that fit most…
P
Printables
Cable Holder for MUJI Shelving Unit
Cable Holders for MUJI Shelving Unit. I recommend to use PETG, but PLA works fine. 無印良品ユニットシェルフ用のケーブルホルダーです。 PETGの使用をお勧めしますが、PLAでも問題ありません。
P
Printables
Rivet Style Shelving Connector
I recently came across a set of “Muscle Rack” brand rivet-style shelves. These types of shelves can be stacked on top of each other to create a shelf with a smaller footprint. The only issue was that the connector pieces were missing, so…
P
Printables
Shelving corner protector
v1 - glue on some rubber corner protectors to protect a shelving unit (the black part, actually comes from HomeDepot light panels to prevent shipping damage) But I quickly realized I would keep brushing against them and they would break…
P
Printables
Shelf (Modular Dovetail Hexagon Shelving System)
This modular hexagon wall shelf offers a customizable storage solution, allowing you to print as many shelves as needed. Each shelf features six dovetail joints for easy attachment to other shelves, as well as six screw holes for secure…
P
Printables
Steel Shelving Casters Upgrade
This model is intended for (plate) Steel shelving with 34mm-sided L-profile legs. I highly recommend to set the first shelf at the lowest height setting, to add rigidity and properly fix the beams to it. Printing 9 perimeters No supports…
P
Printables
Paper towel rack for Everbuilt and Rubbermaid wire shelving-remix
Paper towel holder that can hang off of standard Rubbermaid or Everbuilt wire mesh shelving like at home depot. ( not heavy duty shelves) Printed no supports PTEG 15% infill
P
Printables
Simple Small Trash Can Holder For Shelving Unit
A simple trash can holder to keep a small garbage can off the floor. I wanted to have a garbage can nearby for all the little pieces of filament a 3D printer generates and I came up with this solution. All that's required for hardware is…
P
Printables
Keyhole Storage Shelving Hook
Keyhole Storage Shelving Hook PLA with 50% infill (I'm sure you could use PETG for more Strength but this is pretty sturdy with PLA.)
P
Printables
Wire Grid Shelving Node
A corner node for wire grid shelving. The node snaps onto / has a friction fit with the wire grid panels, ideally print with a material that isn't too stiff, otherwise it will crack easily. PETG and ASA seem to work well.
P
Printables
USB SD and MicroSD organiser, for shelving units
Easy storage for USB keys, SD, MicroSD cards and assorted cables. This is designed to slot into a rack shelving unit. Variations to attach to a wall or door. Screw holes or use 3M removable sticky pads. The panels are separate and…
P
Printables
S Hook Clip for Wire Rack Shelving
I was tired of my other printed s hooks falling off my wire rack. These hug the wire rack a little tighter and therefore won't flop around as much when you go to hang stuff on 'em. the light duty works for hat weight items, heavy duty for…
P
Printables
Single rod closet wire shelving bracket (openscad)
The original model looked great when the other half saw it, and wanted some for the closet. After quickly realizing that our builder selection had only a single top support rod instead of 2, I closed off one in the slicer to test. Close…
P
Printables
French Cleat Shelving and Display System - Configurable Backdrop / Background
I needed a customizable background for my Zoom/Teams/Hangouts background. I settled on a French Cleat system and I am now building / designing a collection of French Cleat shelves, boxes, hangers and display clips for showing off my…
P
Printables
RepRack 20mm bracket for B&Q Twin Slot Shelving
Remix of the 20mm RepRack bracket for B&Q twinslot which had different dimensions.
P
Printables
Uniweb Shelving Coat Hook
I got tired of not having somewhere to put my jacket, so I designed this coat hanger that slides into the Uniweb shelving systems. I printed it at 30% infill ( could probably go lower ) Print standing up on its side
P
Printables
Retreat shelving connector
I made this to connect several Retreat racks by Green Wood. Used 4 of them between each pair of rack. Two on lowest shelves and two on upper. Fixed with two 4x30 screws each. Printed flat with PETG. Сделал деталь для объединения стеллажей…
P
Printables
B&M 3 Tier shelving foot 387366
B&M 3 Tier shelving foot 387366 use a bit of glue to stick in the stand tube. Add self adhesive rubber feet supplied
P
Printables
Keter Garage Shelving Unit Cap
Bought two used shelf units with one set missing the top cap. The pictures show the original on the left and the new one on the right. The shelf sizes are 18 x 36 and 24 x 36. They both look alike but only one set has Keter on the end…
P
Printables
Minimalist Hex Shelving System
So this was my first solution to present prints with prints. I just printed the hexes with variable depths, arranged them in the desired pattern, counted the needed locks and attached to the wall, and when I had the holes marked and…
P
Printables
Rod organiser for heavy duty shelving with cable tie mount
I wanted to organize my miscellaneous rod and pipe storage in the basement. So I made this holder for a 90mm pipe. It is designed to be attached with cable ties to the legs of two heavy duty shelves. There is an extra model with a notch…
P
Printables
HDX Wire Shelving Filament Storage For 3/4" Dowel
The standard Home Depot HDX NSF shelving has a different wire spacing and diameter than the Heavy Duty or Commercial Grade models that everyone seems to have made parts for. This will fit this model or others like it from Home Depot.…
P
Printables
ShelfIT | Stackable Shelving System
ShelfIT is a 3D-printed, modular shelving system designed for maximum versatility. With a fixed base size of 250x170 mm and three height options, it allows you to create customized storage solutions. Its stackable design ensures stability…
P
Printables
Mounts to attach 48" power strip to Muscle Rack metal shelving + plus optional Locking Cap Inserts for them
Printed mounts to attach a 48" power strip to Muscle Rack metal shelving (48 width) + plus optional Locking Cap Inserts for them. Printing tips Print as oriented No supports required Infill, perimeter walls, and layer heights (based on…
P
Printables
Spool Rewind Spring for Wire Shelving
I saw VincentGroenhuis Auto-Rewind Spool Holder and had to make it work for me. The spring rewind works flawlessly. I had to remix for the wire shelf hangers that I use. Wire Shelving Filament Spool Holder by CallJoe can be found here:…
P
Printables
Parametric Auto-Rewind Spool Holder-Remix for Wire Shelving
Upgraded my previous spool management system ( https://www.thingiverse.com/thing:3270230 ) with a remix of Vincent's Parametric Auto-Rewind system. Spool hub is set for Hatchbox filament spools. Nice work VincentGroenhuis! Thank you Print…
P
Printables
Stackable Holder/Storage of Build Plates for Under Shelving - REMIX
I have both Ender 3 S1 & Bambu X1C build plates that I wanted one center location to store them all. I liked Michal's Stackable design for under a shelf, but the 230mm & 250mm models could not be used together in one stack. So I remixed…
P
Printables
Anti-Vibration rack shelving feet
These feet allow a rack style shelf unit to achieve separation from the ground by containing underneath them a packet of foam. This dampens vibrations and also ensure the thin metal edge of the rack won't scratch or damage the flooring.…
P
Printables
Filament Spool Holder w Creality Adaptor for Gorilla Rack Industrial Shelving
Fits Gorilla Rack Industrial Shelving, 77” x 24” x 72" Costco Item 1600208 https://www.costco.com/gorilla-rack-industrial-shelving%2c-77%e2%80%9d-x-24%e2%80%9d-x-72%22.product.4000295255.html Hardware needed: Requires a Creality style…
P
Printables
Flush Cutter Mount for Reibii Metal Pallet Shelving
I wanted a way to mount my flush cutters and needle-nose pliers where I could grab them easily when working on my printers. I couldn't find a better cover/ mount design than the 4020 Mount by RaayBandz on Thingiverse-- we have them…
P
Printables
Hooks for Wire Shelving
These hooks snap onto wire shelving. The shelving has ¼ inch (6.35mm) wires spaced 1 inch (25.4mm). They are fine on zinc plated, chrome plated, stainless steel; but not OK on rubber coated shelves. The smaller hook works well to hold…
P
Printables
Hooks for Bunnings Shelving
Liked the original design as it is a quick and easy print. I have adjusted pin distances so they fit on Montgomery and Pinnacle branded shelving from Bunnings. Montgomery - 1mm metal thickness, ~33mm pin distance Pinnacle MDF - 1.5mm…
P
Printables
Simple parametric riser foot for Ikea BROR shelving
Simple parametric riser to help level Ikea BROR shelving on uneven surfaces that prints quickly and follows the original Ikea design. Adjust the RiserHeight parameter to the height between the bottom of your BROR leg and the floor. This…
P
Printables
Beefy Replacement Shelf Bracket Peg for Cheap Particleboard Shelving
I had lost a couple of the dinky clear-plastic pegs, for holding the shelves on a few small cheap-particleboard shelving units, and a big bookshelf I own, So I took it as an opportunity to make bigger/sturdier ones to print and use…
P
Printables
Modular Shelving For Dry Cabinet Spool Storage
I use a dry cabinet to store my spools once they are unboxed, and was just stacking spools on top of the other. Invariably, I need one near the bottom for my next print, and end up dumping most of the higher ones out onto the floor to get…
P
Printables
Screw-in foot for 1" Wire shelving
I wanted to split a tall wire shelf into 2 hip-height shelves but was concerned about the sharp edge damaging the floor as more weight gets put on the shelf. This a foot that will screw in and spread the load to prevent damage to the…
P
Printables
Hook for Modular Shelving or Desk
Hook to attack to modular shelving unit upright. Not sure the exact standard of the “slotted standard” but the holes are 1" on center with a tapered trapezoidal cut with the narrow end being about .485" and the wide end at the top being a…
P
Printables
Paper Towel Support for Shelving Post
Requires two M3x6 BHCS and M3x4x5 threaded brass inserts.