Wire Shelving Hook
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Intended to replace the weak plastic wall anchor hooks that come with wire shelves.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 115
- Makes
- 0
- Views
- 625
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I designed this after dealing with the standard wire shelving hooks that would break off with a small amount of force over time.
The hook is intended to be used in place of the standard shelf hook/wall anchor. It has the same offset distance from the shelf to the mounting hole as the original item. However, you will need to install a new wall anchor in the wall to replace the broken original anchor/hook.
If you feel the need to add additional mounting strength you can utilize the bottom hole for a second wall anchor or simply use the lower one if the upper hole has damaged drywall that cannot be used with an anchor.
I printed my hooks with GF Nylon but you can also use PETG and PLA if you know the strength of your filament. Otherwise I recommend using nylon, ASA, and ABS with 4-6 perimeters and 20% infill, and lay the hook on its side to print.
STEP file added if you want to modify the hooks hole placement to fit your needs.