Hooks for HDX Plastic Garage Shelving
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Models to add a front and side hook to your Home Depot shelves.
- Rating
- 5 / 5
- Likes
- 49
- Downloads
- 166
- Makes
- 2
- Views
- 778
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Comes in two sizes for the front and side of your shelf. 4 models total. The photo shows the large sizes. The hooks are surprisingly strong when printed with just 2 perimeters and 2 top & bottom solid layers.
BUT BE CAREFUL; overloading these hooks can obviously tip over the shelves. Especially the front hook. Use at your own risk. Also, I do not recommend printing this with PLA. PLA will slowly deform under load (aka creep).
Note: Feel free to ‘cut’ the models in your slicer if you want a narrower hook (e.g. to hang a towel by the tag). Also, the side hook can be wider, but not the front hook.