HotWheels stand for 8 cars
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Inspired by another model, but was completely remake from scratch.
- Ocena
- 5 / 5
- Polubienia
- 21
- Pobrania
- 140
- Wydruki
- 1
- Wyświetlenia
- 482
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial
Inspired by another model, but completely remade from scratch, with a few innovations added. It took several hours and a lot of measurements to complete and make it fully practical.
A major change is the adjustment of the angle and the height of the shelves for better visibility. It is also better adapted to the length of the cars, with a cutout for the tire to improve stability.
Printed in PETG.
Nozzle 0.4mm,
temp 250/75,
infill 15%,
layer 0.2mm
☕ I hope you enjoy it. If you like my work, you can support me via Ko-Fi https://ko-fi.com/matus158 ❤