1 / 12
Tanq2 5" DJI O3 Air Unit 45 deg Camera Mount — zdjęcie 1
1 / 12

Tanq2 5" DJI O3 Air Unit 45 deg Camera Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If you need more protection for your DJI O3 Air Unit camera on your Let's Fly RC Tanq2 frame, try this.

Ocena
0 / 5
Polubienia
3
Pobrania
2
Wydruki
0
Wyświetlenia
46
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

If you need more protection for your DJI O3 Air Unit camera on your Let's Fly RC Tanq2 frame, try this. 

I designed these to be printed with TPU. The left and right halves should be printed separately as well as the dowels and optional lens cover. Insert the dowels and bond the halves with CA glue. 

On the rear, is a place to install a XT60EW-M (easy to find) connector. If you install the connector, the optional lens cover is retained by plugging it into the connector.

See images. Have fun!

Tagi