Tanq2 HGLRC GPS and O3 Air Unit Antenna Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tanq2 GPS/VTX Antenna Mount
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
O3 Air Unit and HGLRC GPS/Mag antenna mounts for Tanq2.
The GPS mount fits several antennae including HGLRC M100 and M100-Pro. It is tilted up 45 deg to maximize coverage when actually flying (nose tilted down). Be sure to let Betaflight know this. The mount has a small lip to capture the antenna. Use tweezers or a thread "snake" to route your wiring to the mount rack.
The O3 Air Unit Antenna Mount is well protected. You will need to remove the stiff stray from your antenna wiring.
Both antennae work perfectly with this configuration (>25 sats, RTH is perfect with mag, great VTX signal even out to 1000m flying toward home).
You can use these mounts together or individually.
The GPS mount features a stowage space for any excess wiring in that area of your build. I stow my GPS and VTX wiring service loops in there.
Have fun!