Pagoda Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The floors of the Pagoda are illuminated Plexiglass acrylic.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 12
- Wydruki
- 1
- Wyświetlenia
- 127
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Pagoda Lamp: The floors are acrylic plexiglass.
The lamp is meant to be printed at 150%.
80mm square model base > 120mm plexi base.
Files:
PagodaTwo-all - is the whole pagoda in one print. 80mm base.
PagodaTwo-floor-1b.stl - ground floor. 120mm plexiglass base.
PagodaTwo-floor-2a.stl - second floor. 90mm plexiglass floor.
PagodaTwo-floor-3a.stl - third floor. 75mm plexiglass floor.
PagodaTwo-floor-4a.stl - fourth floor. 60mm plexiglass floor.
PagodaTwo-floor-5a.stl - roof. 50mm plexiglass attic.
I had a small piece of plexiglass and wanted a multi tier lamp with the light coming from the edges.
I had to work out the best way to fit all the squares onto the (162 x 325mm = 5.5" x 13") piece I had.
After cutting the acrylic, sand the edges and unseen surfaces of the acrylic.
This will frost the surfaces and make the light more diffuse, to come out of the edges.
I didn't sand the base, because it is exposed, but I sanded the edges.