Pagoda Lamp
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The floors of the Pagoda are illuminated Plexiglass acrylic.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 12
- Makes
- 1
- Views
- 127
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Pagoda Lamp: The floors are acrylic plexiglass.
The lamp is meant to be printed at 150%.
80mm square model base > 120mm plexi base.
Files:
PagodaTwo-all - is the whole pagoda in one print. 80mm base.
PagodaTwo-floor-1b.stl - ground floor. 120mm plexiglass base.
PagodaTwo-floor-2a.stl - second floor. 90mm plexiglass floor.
PagodaTwo-floor-3a.stl - third floor. 75mm plexiglass floor.
PagodaTwo-floor-4a.stl - fourth floor. 60mm plexiglass floor.
PagodaTwo-floor-5a.stl - roof. 50mm plexiglass attic.
I had a small piece of plexiglass and wanted a multi tier lamp with the light coming from the edges.
I had to work out the best way to fit all the squares onto the (162 x 325mm = 5.5" x 13") piece I had.
After cutting the acrylic, sand the edges and unseen surfaces of the acrylic.
This will frost the surfaces and make the light more diffuse, to come out of the edges.
I didn't sand the base, because it is exposed, but I sanded the edges.