Ring video doorbell pro wedge
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angled wedge for a Ring Video Doorbell Pro.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 208
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Open Community License v1
When I mounted my Ring Video Doorbell Pro with the stock 15 degrees mount, it was a little too much, so I made my own wedge. The 10 degrees mount ended up being perfect for me. The mount turned out really good so I thought I'd save a few angles and share it on here.
I especially like the hollow gap where the doorbell mounts to because I feel like this will allow the doorbell to breathe a bit better. While I haven't noticed my doorbell getting especially hot, it does have quite the heat-sink on the back of it.
The dimension from the top to the bottom hole where the doorbell mounts is 105mm.