Simagic P-HPR Mount for HE Sprint Pedals
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount to attach Simagic P-HPR actuators to HE Sprint Pedals.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 147
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
I needed a reason to fire up Fusion and print something, so I created these mounts to connect my P-HPR actuators to my HE sprint pedals. This is designed to use the countersunk screws that come with the P-HPR and re-uses the M4 countersink Torx screw that comes with the HE Sprints. It's also my first design using a heat press insert, which I really liked for this application. The holes are the inserts are modeled at 5mm, which print at ~4.85 mm on my printer. I use cheap 5mm reamers to get the holes perfect for the inserts I have. The final diameter depends on the inserts you use.
I only have 2 P-HPR, so I haven't tried this on the clutch, but there really isn't any reason it wouldn't also work there.
I printed with 4 perimeters because of the insert, and printed 40% gyroid infill using PETG.