Simagic P-HPR Mount for HE Sprint Pedals
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount to attach Simagic P-HPR actuators to HE Sprint Pedals.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 147
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
I needed a reason to fire up Fusion and print something, so I created these mounts to connect my P-HPR actuators to my HE sprint pedals. This is designed to use the countersunk screws that come with the P-HPR and re-uses the M4 countersink Torx screw that comes with the HE Sprints. It's also my first design using a heat press insert, which I really liked for this application. The holes are the inserts are modeled at 5mm, which print at ~4.85 mm on my printer. I use cheap 5mm reamers to get the holes perfect for the inserts I have. The final diameter depends on the inserts you use.
I only have 2 P-HPR, so I haven't tried this on the clutch, but there really isn't any reason it wouldn't also work there.
I printed with 4 perimeters because of the insert, and printed 40% gyroid infill using PETG.