Counting matching models…
If you have Heusingkveld Sprint Pedals and want real ABS feeling, you can get it quite low cost. It's for this bass shaker https://amzn.to/3RGYA0O * to be mounted it needs 6 pcs M8x30 ISO 4762 Bolt 2 pcs M8x45 ISO 4762 Bolt 8 pcs M8 Nut…
SprintCore is a futuristic running shoe concept designed for 3D printing. With its bold geometric structure and layered sole, it's ideal for summer wear, urban exploration, or as a creative TPU-based experiment. The open design ensures…
Sprinter Van - Rear Door Magnet Bumper Housing - (T1N 2002-2006) Replaces Mercedes Sprinter T1N | Part Number: 901 740 03 16 (not exact match but it works) Designed this replacement after the original cracked from rust expansion. Pause…
imprimer en ASA, coller avec Sikaflex, l'entré du fils est enligné avec le cap en plastique sur le véhicule. Parfaitement enligné pour vision rapproché avec camera de recul Wolfbox (Amazon). Toujours satisfait après 5 ans.
This is a robust cupholder attachment/bracket for the front cupholders in a Mercedes-Benz Sprinter van. It has holes for #10 wood screws so you can attach whatever size/material of tabletop you want. The cupholder portions have 1"…
The trim rings that hold the door, wall, shower, and trim panels onto the Jayco Terrain and Entegra Launch Mercedes Sprinter Van RVs are cheap and thin plastic. These models provide a thicker, stronger retention to replace the OEM pieces.…
This is just the base modified from LetsPrintBaby https://thingiverse.com/thing:4644060 for 10mm X 3mm magnets to be glued in. The rest of the files can be found at the original page. Category: Signs & Logos
UPDATE 3/16/25: I found that the added weight of using the extension arm causes the mirror to rotate forward at the location where the extension arm and the OEM arm kit attach. To remedy this, I have added two new parts, the “Mirror droop…
Designed for the Euroimmun Sprinter XL. This is an emergency stop button shield to prevent accidental actuation. The emergency stop button is accessible and can be turned and pressed but now it is covered to prevent accidental actuation…
We have excess amounts of these 15mL 20mm tubes we used in the Dynex DS2. They can be used in the Euroimmun Sprinter XL but sit precariously in the machine. I created this adapter so the tubes can be centered and sit securely in the…
I recently upgraded my Ender-3 Max Neo to use the Creality Sprint SE extruder. While this has been an awesome update to the printer, the filament runout sensor was now useless due to a different filament path. I wanted to get the sensor…
These are transitions printed for a friend who designs and launches very large rockets. I'll post a picture of the finished product here when done.
Just some small tweaks to these incredible adapters to make for easier printing and assembly. Printed in Jessie Elixir PLA on a MK4S.
This is a simple and easy to print adapter to solidly mount your HPR Neo haptic devices to your Heusinkveld Sprint pedals. These print and work well using PLA. I also printed using ABS. 100% Infill is recommended. 50% infill works fine…
When starting to run, break into a sprint at 150% of your normal running speed for a maximum of 3 seconds. Causes the Exhausted status effect for 60/50/40 seconds. Category: 3D Printing
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Simple and easy gift for someone who loves sprint car racing.
A hard case for the NetAlly LinkSprinter LS300 Pocket Network Tester. I bought mine used so it didn't come with the soft protective cover. I hope to improve on the original soft cover by including a space to store the two AA batteries…
A design for a brake handle, based on the Class 150 Sprinter DMU units of the UK but also found on many UK multiple units, to be used on a 6mm splined shaft potentiometer / rotary encoder such as found on the cheap chinesium macropads…
The VS30 has a deeper panel for the switches and they're not round on all four sides. Print Settings Printer Brand: Bambu Lab Printer: Bambu X1C **Rafts:** No Supports: No **Filament Material:** PETG Category: Other
Printed in PLA, 0.4 nozzle vanilla settings. To be used with a ¼" camera screw
These are replacement dash vents I made for the T1N Dodge or Mercedes Sprinter. These are left and right sides that fit both drivers and passenger sides. They are labeled L1-L6, R1-R6. There are also a set with a hole on one side to use a…
Holder for an iPhone 13 ProMax that fits into the slot in the dash on the passenger's side. It can be mirrored in your slicer if you need it for the driver's side. The fit is tight so the phone will not vibrate. There is a slot in the…
A really excellent model to provide additional large cup holders for Mercedes Sprinter Vans. This works with any late model Sprinter, and RV vans like Revel, Terrain, Launch etc. The mount is separate from the cup holder and is attached…
Wedges to raise the view of the rear camera for full time use as a rear view mirror. For full time use, a software mod cam be purchased from Mid City Engineering. I printed these with PETG for durability and heat resistance. ASA would…
I have printed them standing on the bottom without support, I have made them in Petg for extra durability.
Pringles SPRINT – CHECK BACK FOR UPDATES Post launch pictures and I'll add them to the default photos for this project!! Thank you Truthornothing for the launch picts! Alpha.05 UPDATE Forgot to include the rail button template for the fin…
Handyhalterung für die Öffnung im Mercedes Sprinter mit Kugelkopf 17 mm für Halterung von z. B. Josh Für andere Seite einfach spiegeln. Infill 100 % und 0,2 mm Druck
The dashboard cupholders on Mercedes Sprinter vans are pretty much useless for cups. On long trips, we need more cupholders (coffee, water, sunflower seeds etc.)! This model makes the small cupholders useful by offsetting a larger cup…
Misprint card from Balatro Oops! All 6s SHOULD buff Misprint and no you can't convince me otherwise All credit to LocalThunk and Balatro for the design
With this Adapter you can mount a PanelPilot SGD 43-A HMI Touchscreen in a Mercedes Sprinter.
Ersatzteil Sonnenblenden-Scharnier für den Sprinter W906 von 2006-2018.
Intended as a basic replacement standing grip for Anschütz 1827F Sprint model rifles. This model will also work on newer, Comfort model rifles but will not following the profile of the standing grip mounting plate. Please consider…
These cupholders are big enough for most cups. Can easily fit a can that is inside a YETI coozie with some room to spare. Also has pen holders build into the space. sprinter-cup-base-cups-1.1 - Best version, clean.…
If you have Heusingkveld Sprint Pedals and want real ABS feeling, you can get it quite low cost. It's for this bass shaker https://amzn.to/3RGYA0O * to be mounted it needs 6 pcs M8x30 ISO 4762 Bolt 2 pcs M8x45 ISO 4762 Bolt 8 pcs M8 Nut…
Na zaznačené plošky přilep kousek gelové oboustranné pásky a rázně zasuň do otvoru v palubce. Pro otvor na levé straně zrcadli model ve sliceru. Rozteč děr sedí pro RAM držáky. Verze pro vruty, pro šrouby a kulový úchyt na držák vysílačky…
Badge for Mercedes sprinter rear door ( tested on Sprinter 313cdi )
Here is my latest project, a remaster of this Mercedes-Benz Sprinter van that I shared on other platforms a few years ago. I updated the bottom to make it flat and added some little details. I also created a new multi-color version for…
EN Briggs & Stratton Sprint 350 375 400 450 500 550, 3,5hp 4 hp 4,5hp engine head seal template. You can print in PLA / ABS and use this template to cut the engine seal from an engine seal blank paper sheet. IT Template per guarnizione…
2002 Sprinter kitcard Its designed in a way so you can open, or close the backdoors. At this tiny ratio the hinges are not the best.. Its more likely you either put the doors on as open, or as closed.. I will rework it in the following…
Replacement/upgrade flywheel cage for the N-Series Sprinter. 41mm spacing for improved performance over the 42.5mm cage in the post I remixed. I'm getting about 125fps on valkyrie motors, worker smooths and the 6 AAs from the stock…
SprintCore is a futuristic running shoe concept designed for 3D printing. With its bold geometric structure and layered sole, it's ideal for summer wear, urban exploration, or as a creative TPU-based experiment. The open design ensures…
These switch covers for the Mercedes Sprinter W903 offer a snug, secure fit—requires firm pressure to install properly. Printed in ABS-GF with 3 walls, 15% gyroid infill. Supports optional, but recommended for best results. Available in 3…
This is a set of conversion parts for the Nerf N-Series Sprinter that allows for the use of half-length darts and talon mags. Features: Minimal hardware required Integrated PCAR on flywheel cage Full dart guide for more reliable feeding…
Mercedes Benz Sprinter Switch Cover (Schalterabdeckung)
Moldura do radio sprinter modelo 2002 modelo alongado para adaptação de radio com tela multimidea, utilizar retifica.
This is a cell phone holder for an iPhone 14 with an Otterbox case. You need a Threaded sleeve m6
This is simply a scaled down remix, 96% of the original. I've also included a version with 12mm opening for the cables to come through on the driver's side.
The official tool tray is large and clunky. It also gets in the way for collapsing the sprint stand. I created a modular system, based on my wall storage system, and adapted it to the sprint stand. Now, I can create tailored tool holders…
Small wrench to tighten the inner nut of the Bigsby spring without disassembling it. https://www.youtube.com/watch?v=Ys_z6wmE5eA Pequeña llave para apretar palanca de tremolo Bigsby sin desmontar cuerdas. Has my design been useful? I…
My first design i made of a birdhouse with removable roof and wood grain effect. holes in back for fixing and front perching rail. Come follow me on insta and Facebook at AusPrint3D
I printed a similar fitting model which had a ball as part of the print, the ball broke while driving on rough roads. https://www.thingiverse.com/thing:6937330 So I created my own, similar but with air vent like slats to attach an air…
This replaces the 2 switch blank switch bank, to fit a single carling type rocker switch in its location.
Tool for detecting leaks from exhaust manifolds and intakes.
Print the adapter as well two alignment pins. The adapter is designed for the Headset insert to be rotated 45° (do rotate the compressing ring as well!). This allows for easy routing of the Brake lines without any bunching. Since I'm…
This is a template to make a bottom plate for a Klein 1/10 R/C Sprint Car. This template is made using parts from a Rc10GT drive Tran / Rc10 buggy suspension. Original is made from a aluminum plate 2.25mm thick about 10 7/8" x 2 3/4"…
Important: you have to relocate the Airbag Sensor to fit these Enclosure. I dont take any responsibility for using this Prints/Parts in your car. You build this at your own risk. The doorpanel has to be modifed. I will ad aditional parts…
Threshold and floor caps. Created on the basis of the original cap, but without an indentation due to the orientation of the print. Printed from TPU
If there is anything that you want me to fix let me know in the comments.
Use Dayton BDS Exciters on your Heusinkveld Sprint Pedals. Use the IMS adapter that came with the exciters. Extra Hardware Required (per pedal): M2.5x12mm screws/washers (2x) https://amzn.to/3Ikf2A2 M4x25mm Countersunk Bolt (1x)…
The switch must be glued in place, as there is not enough space for the lock nut. For best results, print in PETG to ensure sufficient flexibility for the clips.
Hey everyone! Here's my latest upload, it's a sprint car! I used 1.8mm brass rod for the axles, but filament would probably work as well. This is kind of a complicated model in my opinion, and there's a ton of tiny parts. If y'all have…
Two of my FAVORITE rockets growing up ( Astron Sprint and Cineroc ) were designed by Mike Dorffler. So as a tribute to his inspirational work I merged them together (more or less). The Astrocam Sprint nosecone can be printed in colors…
This is a universal holder (mainly for smartphones) designed for the overhead storage compartment of the Mercedes Sprinter. It simply snaps into place and stays securely mounted. The angle is optimized to be perfectly perpendicular to the…
After a long search, I couldn’t find any good solution to mount a smartphone or other devices due to all the rounded surfaces in the car. So, I removed the air vent (it’s just a snap fit) and took off the decorative ring — that’s where my…
The HE3d K200 has a small piece of acrylic that mounts to the corner frame and receives the adjustment bolt. The design leaves a little to be desired. While this modification is not perfect ( a better one would probably attach to both…
Hi, I'm offering the clip that holds the seat securely in place for a Mercedes Sprinter from 2018 and later, which is prone to breaking. Ideally, print the part in ABS/ASA with an infill of over 50%. Carbon fiber reinforced plastics are…
Hitch for Bruder Sprinter 2672 Kemping - spare parts Bruder 42675
I needed a reason to fire up Fusion and print something, so I created these mounts to connect my P-HPR actuators to my HE sprint pedals. This is designed to use the countersunk screws that come with the P-HPR and re-uses the M4…
Simple holder for thru-axles and hex keys to fit the Feedback Sports Sprint workstand. Thanks to Chris M for the idea, but a HUGE thanks to Dominic from Feedback Sports for his assistance and ideas. Designing for something I can't test…
I enjoyed this print so much that I wanted to do it again and add some upgrades. The one in these photos is the final test print before I buy a new roll of ASA and complete the final version. I liked the contrast, so I thought I’d share…
The original screw caps on my Mercedes Sprinter kept falling out and getting lost. These printed caps cover the screws well. I recommend PETG or ABS, as it can get very hot in the car. The tolerances of the screw holes and caps are not…
Sprinter Van - Rear Door Magnet Bumper Housing - (T1N 2002-2006) Replaces Mercedes Sprinter T1N | Part Number: 901 740 03 16 (not exact match but it works) Designed this replacement after the original cracked from rust expansion. Pause…
imprimer en ASA, coller avec Sikaflex, l'entré du fils est enligné avec le cap en plastique sur le véhicule. Parfaitement enligné pour vision rapproché avec camera de recul Wolfbox (Amazon). Toujours satisfait après 5 ans.
this is a Template for over head cupboards in a 2013 Mercedes sprinter hopefully it helps some one as it did save me a ton of time. please note this is uploaded and created to benefit the community free of charge I do not give permission…
I print these from PETG for additional durability. They mount to the servo by using longer screws in the stock location. I use a short M3 screw to hold the transponder. This holder works for both winged, and wingless configurations of the…
Hello, I have modeled these covers to fit on a Zipp SL80 Race handlebar where the Sprint Blips would sit. I dont know if it will fit to any other similar handlebars but you can give it a shot. I printed in PETG, also went quite slow and…
This is a robust cupholder attachment/bracket for the front cupholders in a Mercedes-Benz Sprinter van. It has holes for #10 wood screws so you can attach whatever size/material of tabletop you want. The cupholder portions have 1"…
Špunty osy předního kola triumph sprint 955i. Front wheel axle plugs.
The latch that holds the hose in place on my vacuum cleaner broke off, so I designed and printed a replacement. I also lost the spring for the latch, so I took the spring out of a ball point pen, cut it in half, and used that. Notes: No…
Needed a replacement for an old Sprint chassis, so I made this simple model from scratch.
Designed to allow for the use of the Specialized SL7 spacers/stem on the 2022 Allez Sprint. It transitions from the round headset to the SL7 spacers with cutouts for internal cable routing. I printed in PETG at .2mm layer height, 100%…
Printed in TPU @0.25mm layer height at a 45 degree angle to avoid flat spot. Also used Fuzzy skin Voronoi to approximate the seat plastic texture. Mirror along the X-Axis for left and right side. The bumper slides snuggly at the end of…
This is meant to hold charcoal, pencils, kneadable erasers, string, or anything else you may be drawing with that mught fit on it. At my university the drawing classes has us use 24x36in newsprint, and a 1/8 in particle blard balcking…
I edited the original file so that it now has a cup holder on the left side.
