GEN2 Under Table Filament Spool Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Filament spool holder for standard 1kg rolls.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 187
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
PRINT ORIENTATION IS UPSIDE-DOWN - There are many modifications to the standard drawer frame and I've had the best results from printing with the dovetail mount on the print bed.
This hanger uses the GEN2 1W drawer design so up to 5 spools can fit in the Ikea Lack table.
After numerous failures to successfully print a 4H drawer so that more drawers could be mounted under the spool holder, I scaled back to a bottomless hanger. I still had some issues so I removed a lot of the details that are on normal frames - Quick Locks, back magnet slots, and anything on the bottom of the frames have been deleted.
The axle is in three parts for better printing as well and are press-fit together. The ends use 608 bearings that are also press-fit on. Alternatively there is a version that is 100% printed, though I have not tested this.