1 / 2
lollipop sticks & French Cleat Holder — zdjęcie 1
1 / 2

lollipop sticks & French Cleat Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Everyone knows what a lollipop stick is, why are you reading this!

Ocena
5 / 5
Polubienia
137
Pobrania
634
Wydruki
5
Wyświetlenia
1307
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This set of 3D printed lollipop sticks is designed as a simple, low-filament consumable for general stirring, mixing, and craft work around the workshop or hobby space.

The sticks are intentionally basic, making them ideal for epoxy, paint, fillers, adhesives, resins, and general workshop mixing, as well as light craft and hobby tasks. They’re perfect for using up the last few grams of a filament roll and can be printed in batches to keep a steady supply on hand.

See instruction video on Youtube - HERE 

Two thickness options are included:

  • 1 mm sticks – flexible and ideal for light mixing and fine work

  • 2 mm sticks – stiffer and better suited to thicker materials

A French cleat holder is also included, allowing the sticks to be neatly stored and easily accessible on a workshop wall. The included French cleat holder is designed specifically for 18 mm (3/4") thick cleat systems, using a standard 45-degree cleat angle.


Print Settings – Lollipop Sticks

  • Material: PLA

  • Infill: 20%

  • Supports: None

  • Layer Height: Standard (0.2 mm works well)

  • Perimeters: 2–3 recommended

  • Prints flat on the bed with no special requirements


Print Settings – French Cleat Holder

  • Material: PLA

  • Infill: 15%

  • Supports: None

  • Layer Height: Standard (0.2 mm)

  • Designed to print cleanly without supports

Tagi