Rack-Mount Laptop Holder (Stage-Safe Design)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a 3D-printable laptop holder designed to sit securely on top of a standard rack, preventing laptops from sliding
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 301
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a 3D-printable laptop holder designed to sit securely on top of a standard rack, preventing laptops from sliding or falling during live performances, rehearsals, or studio sessions.
The holder creates a stable resting point for a laptop when placed on a rack case, protecting your device in high-movement environments such as stages and touring setups. It is ideal for live playback rigs, FOH positions, or mobile studio configurations where space is limited and stability is critical.
I made two versions, a small and big version. The big version ended up being too big to fit into my pelicase, so I made a smaller one with a lower profile :)
Features
Designed to prevent laptops from sliding off rack cases
Simple, low-profile design suitable for live and studio use
No modifications to the rack required
Lightweight, sturdy, and easy to print
Printing Recommendations
Material: PLA+ or PETG recommended (PETG preferred for touring / higher temperatures)
Infill: 20–30%
Layer height: 0.2 mm
No supports required (depending on orientation)
Print orientation: flat for maximum strength
Use Disclaimer
This holder is intended as a safety aid, not a permanent mounting solution. Always ensure your rack is stable and use additional safety measures when necessary.
If you have specific laptop sizes or rack dimensions in mind, you may want to adjust the scale or modify the model to suit your setup.