Lamp Shade and Lamp Holder Mask (E27) - Periscopic, Slope and Round
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Three Lamp Shades for a 10 cm diameter Bulb plus Lamp Holder Mask (cladding?). Cable 6 and 10 mm. Only for LED-BULBS!
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 65
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Opening/Bulb whole: 30 mm
General settings:
0.20 mm Structural (or Speed)
For the periscopal and slope lamp shade "that's it" - really easy to print :-).
The round needs suppert (up side down is faster) and I recommend ironing for the "fragile" part - see .3mf-file in prusa slicer:
Height Range Modifier: Range 11.80-20.80 (mm)
Add Settings: Ironing / Enable ironing / Ironing Type
-> Enable ironing / Ironing Type: "All solid surfaces"
ONLY for LED-BULBS!
And, if you want to be at the "sure side", you might want to use "V0" or similar-Filament ;-).