Motorola T82 Charging Dock Wall mountable
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This double Holder is designed for the Motorla T82 Walkie Talkie with the option to upgrade it for easy charging.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 49
- Wydruki
- 0
- Wyświetlenia
- 353
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This double Holder is designed for the Motorla T82 Walkie Talkie with the option to upgrade it for easy charging.
You also can use the Charging Port without any problems.
To make it a chargable Dock, you'll need 3 Components:
Pogo Pins with 1,5mm Diameter at a length betweeen 3,5mm up to 4,5mm - as example Something like this
USB-C Port with 12x13,8mm PCB - Example
Cable (I used an old USB Cable and recycled it)
I would advise to firstly solder the Cable to the Pins and insert them afterwards. It's a little bit tricky but it's not impossible.
The Left Pin (viewed from the back) is negative, the right Pin is positive.
Some Hot Glue helped to fix it down.
The Backplate is designed to sandwhich between the wall and the Holder itself to make Room for the USB cable.
So it's optional if you don't plan to use it for charging.