Jeep TJ/LJ Universal Corner Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A universal corner mount for the Jeep TJ and LJ, works great for a phone holder
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 61
- Wydruki
- 1
- Wyświetlenia
- 467
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Public Domain
This is for the left hand side, however a mirrored part fits the right hand side perfectly as well!
The bottom was created with a 3d scan of the dash and is a very close fit. If you need the scan, I've shared it in my other files.
To bond it to the dash, use 3M brand VHB tape. Before permanently bonding the mount to the dash, apply all tape to the part with no overlapping edges and leave the backing in place, then place the part on the dash corner and feel the correct spot the part wants to sit fully flat to the dash. Carefully mark it with masking tape. Once marked, follow 3M recommendations for proper adhesion and install the mount.
The hole pattern in the center of the part was designed to fit this 1" ram ball mount:
https://www.amazon.com/FPN-Aluminum-Compatible-Components-Motorcycle/dp/B0F5MVCTNB
All holes are sized for a 4mm heat set insert, I used these:
https://www.amazon.com/dp/B0DNJNHBPS