Holder for Build Plate Cleaner Microfiber Holder - Core One
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder for the "Build Plate Cleaner Microfiber Holder". Needs 3x Ø10x3 magnets.
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 71
- Wydruki
- 3
- Wyświetlenia
- 390
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
A holder for the "Build Plate Cleaner Microfiber Holder" [https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder] that attaches to the side of the Prusa Core One/+.
Materials
The holder attaches with 3x Ø10x3mm magnets. I use Neodymium magnets, but the design should work with weaker magnets as the cleaner tool is quite light.
The magnets are designed to fit quite snugly, but you might need a bit of glue.
Print Setting
- Filament: Jet Black PETG (will also work just fine with PLA)
- Nozzle: 0.4mm HF
- Layer Height: 0.2mm
- Infill: 15%, Adaptive Cubic
I've printed it upside down with supports, which might not be needed.