Holder for Build Plate Cleaner Microfiber Holder - Core One
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder for the "Build Plate Cleaner Microfiber Holder". Needs 3x Ø10x3 magnets.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 71
- Makes
- 3
- Views
- 390
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution
A holder for the "Build Plate Cleaner Microfiber Holder" [https://www.printables.com/model/815732-build-plate-cleaner-microfiber-holder] that attaches to the side of the Prusa Core One/+.
Materials
The holder attaches with 3x Ø10x3mm magnets. I use Neodymium magnets, but the design should work with weaker magnets as the cleaner tool is quite light.
The magnets are designed to fit quite snugly, but you might need a bit of glue.
Print Setting
- Filament: Jet Black PETG (will also work just fine with PLA)
- Nozzle: 0.4mm HF
- Layer Height: 0.2mm
- Infill: 15%, Adaptive Cubic
I've printed it upside down with supports, which might not be needed.