Deathcrown – Chained Undead King (Crawling Horror Figurine)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A brutal crawling undead king dragging broken chains, crowned with jagged spikes and rage. Designed to look incredible.
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 328
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
Deathcrown is a chained, fallen king that refuses to die — crawling forward through rubble with his crown still on and his chains still clinging to him like a curse.
This model is built to read well in single-colour FDM prints, with deep shadows, chunky forms, and strong silhouette detail so it looks “finished” straight off the bed in matte PLA.
What you get
1× Deathcrown full model (crawling pose with chains + ground contact)
Printing notes (important)
The pose has lots of “air gaps” (chains, crown spikes, fingers). Supports are recommended for a clean print.
If you want the easiest success: print slightly larger (150–180mm wide) so the chains and spikes have more strength.
Print instructions (Bambu A1 Combo – tested-style settings)
Material: PLA / Matte PLA (best detail)
Nozzle: 0.4mm (0.6mm works too if you want faster + slightly softer detail)
Quality preset (best detail)
Layer height: 0.16mm
Walls: 3
Top/Bottom: 4
Infill: 12–15% Gyroid
Supports: YES (Tree/Organic)
Overhang threshold: ~50°
Support interface ON (for clean removal)
Brim: 5–8mm (helps with the outstretched hands/claws)
Speed: Standard (don’t go crazy-fast on this one)
Faster preset (still looks great)
Layer height: 0.20mm
Infill: 10–12% Gyroid
Supports: YES (Tree/Organic)
Brim: 5mm
Orientation
Print exactly as supplied (crawling on the ground).
This keeps the “weight” and detail where it matters and avoids weak joins.
Support tips (where you’ll need them)
Under crown spikes
Under jaw/teeth area (depending on angle)
Under hanging chains
Under fingers/claws and any “floating” points
Rough print time + filament (guide)
(Varies by scale/settings)
150mm wide: ~10–14 hours, ~150–220g PLA
180mm wide: ~14–20 hours, ~220–320g PLA
Recommended filament (for “straight off the bed” look)
Matte Grey / Matte Bone / Matte Black looks insane on this style.
If you want maximum shadow contrast: Matte Dark Grey.
Category (Printables)
Art (or Toys & Games → Figurines, if you prefer it listed as a collectible)