AVM FritzFon C5 clip, charger cover and magnetic base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Accessories for the AVM Fritz!Fon C5
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 10
- Wydruki
- 0
- Wyświetlenia
- 90
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The Fritz!Fon C5 front cover easily breaks at the bottom if it falls down.
As the phone lacks a belt clip and because it can easily fall out from its charger, I made these 2 parts.
The charger cover is printed from PLA with standard settings and organic tree support and put in place with some nano-tape.
The clip is printed from PETG with 0.12 layer height and 3 wall loops and also organic tree support.
There is also a magnetic base for the charger which can be used to hold the charger at a given position.
I used 20x10x2mm neodymium magnets with it, which I glued in with 2k epoxy.