1 / 5
AVM FritzFon C5 clip, charger cover and magnetic base — image 1
1 / 5

AVM FritzFon C5 clip, charger cover and magnetic base

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Accessories for the AVM Fritz!Fon C5

Rating
0 / 5
Likes
0
Downloads
10
Makes
0
Views
92
Reviews
0

Updated at source:

Model information

Category
Accessories
License
Creative Commons — Attribution — Noncommercial — Share Alike

The Fritz!Fon C5 front cover easily breaks at the bottom if it falls down.
As the phone lacks a belt clip and because it can easily fall out from its charger, I made these 2 parts.

The charger cover is printed from PLA with standard settings and organic tree support and put in place with some nano-tape.
The clip is printed from PETG with 0.12 layer height and 3 wall loops and also organic tree support.

There is also a magnetic base for the charger which can be used to hold the charger at a given position.
I used 20x10x2mm neodymium magnets with it, which I glued in with 2k epoxy.

Tags