ISO Standard Ampoule Models for Medical Simulation
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ISO-sized ampoule models for medical training and simulation with open bottom and removable base for filling.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 52
- Wydruki
- 0
- Wyświetlenia
- 358
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Medical Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This download includes ISO-sized ampoule models designed for educational and simulation purposes.
The ampoules are intended for use in medical training and simulation scenarios, allowing users to practise:
handling and manipulation of ampoules
safe handling techniques in simulated environments
The models feature an open bottom and a separate removable bottom cap, enabling filling.
Printing Information
The ampoule models were printed using an Zortrax Inkspire 3D printer with transparent resin (3DJake, Color Mix Resin Basic). Printing was performed using the standard Z-Suite printing profile for this resin and with a layer height of 0.1 mm.
For optimal print quality, the ampoules were oriented vertically, with the bottom facing downward, allowing for the minimum number of internal supports inside the ampoule. This orientation helps preserve internal surface quality.
Equivalent SLA/DLP systems and transparent resins with similar optical properties can also be used.
Educational use
These ampoule models were developed for medical education and simulation-based training. They are suitable for use in teaching environments, skills labs and student workshops focused on procedural practice.
This model is intended for educational and research purposes only.
It is not a certified medical device and must not be used for diagnosis, treatment or administration of substances to patients.