Case for Morse Tutor ESP32 W8BH / DF2OF
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case for the W8BH Morse Tutor ESP32 building kit from Mat, DF2OF
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 110
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Original text: "This is a housing for the W8BH morse tutor. it is designed to fit the esp32 version where the esp32 board is mounted on female headers. When inserting the board, you have to flex the housing away from the switch on the left side of the board as you tuck the components on the rear into their positions. The screen cover uses 2mm socket head cap screws the main cover uses 3mm flat head screws."
Print settings:
PLA
0.2mm height
no supports needed (please change orientation accordingly!)
M2 x 8mm screws for the screen ("Zylinderkopf")
M3 x 15 (!) mm screws for the top case part ("Flachkopf" or "Linsenkopf")
Modified for the smaller screen, less holes, slightly wider space for the ESP32. Slightly modified knobs.
Want the Morse Tutor Kit From DF2OF? Find contact data here: https://www.qrz.com/db/DF2OF
ATTENTION: the model might be scaled way to big in some printing software. If so, you may want to scale it to 0.1 / 10% of the size.