Short Thumbsticks for the Radiomaster Pocket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Multiple sizes of shorter thumbsticks for the Radiomaster Pocket.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 275
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
I wanted some short thumbsticks for the Radiomaster Pocket, so I designed these, which are similar to the original thumbsticks but shorter, while still fitting into the original stick storage in the transmitter.
Printer settings
0.4 Nozzle
0.1 layer height
2 walls
4 top and bottom layers
available in multiple sizes:
10mm - 8 or 10mm M3 bolt
12mm - 10 or 12mm M3 bolt
14mm - 12 or 14mm M3 bolt
16mm - 14 or 16mm M3 bolt
This is the total height of the stick from the base to the tip of the spike.
There are also some different styles of knurling to choose from, as shown in the images above.
They are mainly used in a thumb style grip, but if you would like some shorter sticks like these, but for a hybrid pinching or pinching style grip, send me a message, and I’ll see what I can do. :)