Magnetic 1/4" Router Bit Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Magnetic holder block designed for 1/4" router bits and accessories.
- Ocena
- 5 / 5
- Polubienia
- 75
- Pobrania
- 171
- Wydruki
- 0
- Wyświetlenia
- 772
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
What is it?
It's a very simple router bit holder designed to hold [x23] 1/4" router bits in place. Design also has [x4] pockets that can store accessories such as collets or bit sharpeners. Note: ⌀5mm to ⌀6mm magnets can be glued into each hole to provide additional holding support. Top row has increased spacing to accommodate larger / wider router bits.
Dimensions.
Holder Overall: 200mm x 140mm x 30mm
Pocket Size: 26mm x 73mm x 10mm
Bit Holes: ⌀6.7mm (with slight taper to lock bits)
Magnets Used: ⌀5.5mm x 1.8mm
How to print?
No supports, 0.3mm layer height (or whatever)