1 / 4
Gloomhaven: Buttons and Bugs Scenario Sleeve (Magnetic) — zdjęcie 1
1 / 4

Gloomhaven: Buttons and Bugs Scenario Sleeve (Magnetic)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Scenario Sleeve with magnets to prevent the usual slipping aroung of the pieces.

Ocena
0 / 5
Polubienia
0
Pobrania
18
Wydruki
0
Wyświetlenia
231
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution

This scenario sleeve has a metal plate embedded. If you glue a magnet to the pieces (heroes and monsters), this will prevent them from slipping around.

I used magnets with the a diameter of 5mm and a thickness of 1mm.

These fit almost perfectly into the hero figure's socket and stick out a bit from the monster cubes (see images) 

Metal sheet dimensions are 65x80mm.

Thickness can be either 1mm or 2mm.

To install it, slide it in from the opposite side of the scenario insert (the bigger gap)