1 / 4
Gloomhaven: Buttons and Bugs Scenario Sleeve (Magnetic) — image 1
1 / 4

Gloomhaven: Buttons and Bugs Scenario Sleeve (Magnetic)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Scenario Sleeve with magnets to prevent the usual slipping aroung of the pieces.

Rating
0 / 5
Likes
0
Downloads
18
Makes
0
Views
231
Reviews
0

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution

This scenario sleeve has a metal plate embedded. If you glue a magnet to the pieces (heroes and monsters), this will prevent them from slipping around.

I used magnets with the a diameter of 5mm and a thickness of 1mm.

These fit almost perfectly into the hero figure's socket and stick out a bit from the monster cubes (see images) 

Metal sheet dimensions are 65x80mm.

Thickness can be either 1mm or 2mm.

To install it, slide it in from the opposite side of the scenario insert (the bigger gap)