1 / 2
New lid with other circuitry for Powerbank — zdjęcie 1
1 / 2

New lid with other circuitry for Powerbank

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Had problems with the original design but liked the case and already had the Cells wired. So i redesigned the lid....

Ocena
0 / 5
Polubienia
1
Pobrania
4
Wydruki
0
Wyświetlenia
57
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Noncommercial

Work in progress!

Go to the original model from qwix for the other parts!

I am using this module to charge my phone and laptop:

https://de.aliexpress.com/item/1005008833937106.html

I thought i could charge it through this board set to 20V:

https://de.aliexpress.com/item/1005005622939899.html

An then use a stepdown converter for 16.8V but the one i used was not up for the task. So i am using only the second option:

And these 4mm sockets as direct connection to the BMS which allows me to charge with an external charger and using it as a mobile powersource and even charge my Car and Motorcycle battery (external circuitry required)
https://de.aliexpress.com/item/1005007372566065.html

It doesnt look like it but there is a lot of space for the wires in there. only connecting to the Socket was a bit tricky. It helps that you can slide in the Quickcharger after connecting the sockets...