1 / 2
New lid with other circuitry for Powerbank — image 1
1 / 2

New lid with other circuitry for Powerbank

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Had problems with the original design but liked the case and already had the Cells wired. So i redesigned the lid....

Rating
0 / 5
Likes
1
Downloads
4
Makes
0
Views
57
Reviews
0

Updated at source:

Model information

Category
Electronics
License
Creative Commons — Attribution — Noncommercial

Work in progress!

Go to the original model from qwix for the other parts!

I am using this module to charge my phone and laptop:

https://de.aliexpress.com/item/1005008833937106.html

I thought i could charge it through this board set to 20V:

https://de.aliexpress.com/item/1005005622939899.html

An then use a stepdown converter for 16.8V but the one i used was not up for the task. So i am using only the second option:

And these 4mm sockets as direct connection to the BMS which allows me to charge with an external charger and using it as a mobile powersource and even charge my Car and Motorcycle battery (external circuitry required)
https://de.aliexpress.com/item/1005007372566065.html

It doesnt look like it but there is a lot of space for the wires in there. only connecting to the Socket was a bit tricky. It helps that you can slide in the Quickcharger after connecting the sockets...