1 / 2
Meishile S-250 PSU cover with switch hole and holder plate — zdjęcie 1
1 / 2

Meishile S-250 PSU cover with switch hole and holder plate

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Meishile S-250 PSU Cover with switch hole, and backplate holder for 2020 extrusion

Ocena
5 / 5
Polubienia
2
Pobrania
42
Wydruki
0
Wyświetlenia
402
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

This is for the cheapest chinise Meishile S-250 PSU. You can find on Aliexpress.

PSU Cover with switch hole, and 2020 frame holder. 

At the bottom you can find a hole for the cabels.

I make it for my Anycubic Kossel! :)

  • make a frame holder for 2020 extrusion with enough space to screw in bolts…
  • there is just one screw hole at the side, so i make a holder place at the sideway for the psu (now its balanced!) :)
  • Print with PLA+ minimum, with no support! (not needed!!!!) 
  • 0.4 nozzle and 0.2 layer hight for accuracy…

Happy printing!

 

Tagi