1 / 2
Filament-Trichter für Etekcity EK5250 - Filament Funnel for Etekcity EK5250 — zdjęcie 1
1 / 2

Filament-Trichter für Etekcity EK5250 - Filament Funnel for Etekcity EK5250

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Passgenauer Trichter für die Etekcity EK5250 Küchenwaage, perfectly fitting funnel for the Etekcity EK5250 kitchen scale

Ocena
0 / 5
Polubienia
1
Pobrania
5
Wydruki
0
Wyświetlenia
48
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution — Noncommercial

🇩🇪 Deutsch

Dieser Trichter wurde speziell für die Etekcity EK5250 Küchenwaage konstruiert und erleichtert das präzise Abwiegen von Filamentresten aus dem 3D-Druck.

Die runde Aussparung an der Unterseite ist exakt auf die Wiegefläche der EK5250 abgestimmt und sorgt für eine zentrierte, stabile Position auf der Waage. Kurze Filamentstücke oder Reste können dadurch sicher eingefüllt werden, ohne daneben zu fallen.

Der Trichter ist für den FDM-Druck ohne Stützstrukturen optimiert und kann schnell sowie materialsparend gedruckt werden.


⚠ Hinweis zur Druckgröße und Skalierung:
Für die Originalgröße wird ein Druckbett mit mindestens 350 × 350 mm benötigt.
Das Modell kann proportional skaliert werden, sofern der komplette Auflagerand weiterhin auf die Wiegefläche der Waage passt. In diesem Fall bleibt die Funktion erhalten, auch wenn die untere Aussparung nicht mehr exakt formschlüssig ist.

Empfohlene Druckeinstellungen

  • Material: PETG (PLA möglich)

  • Düse: 0,4 mm

  • Layerhöhe: 0,2 mm

  • Perimeter: 3

  • Infill: 5 - 10 %

  • Support: nicht erforderlich

  • Druckausrichtung: Öffnung nach oben

Ein Bild der Etekcity EK5250 Waage ist beigefügt, um die Passform und Proportionen des Modells schnell und einfach vergleichen zu können.

🇬🇧 English

Description

This funnel is specifically designed for the Etekcity EK5250 kitchen scale and makes weighing leftover 3D-printing filament easy and reliable.

The circular recess on the bottom is precisely matched to the weighing surface of the EK5250, ensuring a centered and stable fit on the scale. This prevents small or short filament scraps from falling off during weighing.

The model is optimized for FDM printing without supports, making it fast to print and material-efficient.

⚠ Print size and scaling note:
The original size requires a print bed of at least 350 × 350 mm.
The model can be scaled down proportionally, as long as the entire bottom rim still rests on the weighing surface of the scale. In this case, the funnel remains fully functional even if the bottom recess is no longer an exact fit.

Recommended Print Settings

  • Material: PETG (PLA also works)

  • Nozzle: 0.4 mm

  • Layer height: 0.2 mm

  • Perimeters: 3

  • Infill: 5 - 10 %

  • Supports: not required

  • Print orientation: opening facing up

An image of the Etekcity EK5250 scale is included to allow a quick visual comparison of the model’s size, proportions, and fit.

Tagi