Infill % reference board
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a reference board of the various predefined percentages of infill that are presented in PrucaSlicer.
- Ocena
- 4,75 / 5
- Polubienia
- 44
- Pobrania
- 296
- Wydruki
- 6
- Wyświetlenia
- 1364
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
I made a reference board of the various predefined percentages of infill that are presented in PrucaSlicer, just to get a better overview.
In the gcode file, all 14 predefined modes from PrusaSlicer are already configured as shown in the picture.
There is a Pause at 2h (layer 22) when to abort the print.
The gcode file has 0.3 layer hight for faster print.
Gcode file is created for a Prusa MK3s+ in PrusaSlicer 2.4.
The bottom plate is a solid unit of 100% infill just to be able to present the infills differently.
If you download the STL file, you will have to configure each examplebox (14) with different infill % yourself in your Slicer software.
If you like it, please leave a comment! :-)