Infill % reference board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is a reference board of the various predefined percentages of infill that are presented in PrucaSlicer.
- Rating
- 4.75 / 5
- Likes
- 44
- Downloads
- 296
- Makes
- 6
- Views
- 1,364
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
I made a reference board of the various predefined percentages of infill that are presented in PrucaSlicer, just to get a better overview.
In the gcode file, all 14 predefined modes from PrusaSlicer are already configured as shown in the picture.
There is a Pause at 2h (layer 22) when to abort the print.
The gcode file has 0.3 layer hight for faster print.
Gcode file is created for a Prusa MK3s+ in PrusaSlicer 2.4.
The bottom plate is a solid unit of 100% infill just to be able to present the infills differently.
If you download the STL file, you will have to configure each examplebox (14) with different infill % yourself in your Slicer software.
If you like it, please leave a comment! :-)