Wire Shelf Rack (Microwave) Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple print to let you place things with feet (like microwaves) on a wire shelf rack.
- Ocena
- 0 / 5
- Polubienia
- 42
- Pobrania
- 155
- Wydruki
- 1
- Wyświetlenia
- 801
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to place my microwave on a wire shelf rack. The feet did not align with the rack, so 3D printing to the rescue!
I figured I would share the model since I'm sure it could be useful for other appliances.
Microwave is a Panasonic, and the wire shelving is AmazonBasics, but I expect it will work on other models since the shelves all seem to be the same, and the foot profiles are just oblong holes.
You can always use an “negative space” modifier in PrusaSlicer to adapt it to your needs if your appliance foot doesn't quite fit.
PETG recommended, PLA has a tendency to warp and/or crack under constant pressure/loads.