Desk Mounted Cup Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cup holder that can be mounted to the side of a desk with a single screw. It should fit most mugs, cups or bottles.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 158
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Open Community License v1
Designed by myself in OnShape
I moved and did not take my previous desk with me, so I needed to design a new cup holder to mount to the side of my new desk. Learning from my previous models, I figured I would start from scratch with the design. It is now larger than my previous design, as I found some of my larger mugs didn't quite fit. It also now mounts with a single screw into the side of the desk, rather than a passive mount, as this will now be more rigid and a permanent attachment to said desk. I did keep the three notches to allow for mug handles, so I redesigned those to be fairly similar to the previous design. The bracket protruding from the back of the model provides additional support for the print when a heavy mug full of liquid is placed inside.
Allows for any cups, bottles, etc. up to 3.25" in diameter.
This was designed for a ~1.125" desktop. The mounting hole is 0.5625" from the bottom of the desk.
Printed on an Elegoo Centauri Carbon with a 0.4mm Nozzle, using Inland Silver High Speed PETG+
Sliced in Orca Slicer, using the Generic PETG profile with the 0.20mm Standard settings with the following modifications: 4 wall loops, 25% infill density, gyroid infill, organic Tree support, and Mouse ear brims.