1 / 9
Datto ALTO 3 Mid Spacer + m.2 2260 to 2280 adapter Micro server conversion — zdjęcie 1
1 / 9

Datto ALTO 3 Mid Spacer + m.2 2260 to 2280 adapter Micro server conversion

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Raises the Datto Alto 3 (AKA ASRock Beebox-S Series NUC) up 14mm for improved airflow and fatter drives.

Ocena
0 / 5
Polubienia
2
Pobrania
5
Wydruki
0
Wyświetlenia
59
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Computers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

If you like this model please like and download, it helps motivate me to make more!  Please consider using the amazon affiliate link bellow for the required hardware! 

The spacers Raises the Datto Alto V3 up 14mm to increase airflow or make space when you fully load it up drives and ram.   There is also a wedge I made years ago to stuff in an 80mm m.2 drive.  The maximum size of the main nvme drive is 60mm, but with a slight angle an 80mm long 2080 fits in there perfectly. 

At a minimum if you want to raise the Datto, you will need to print the spacer and the 4 leg extensions. The spacer does not require support, but I threw in a few small tree supports into the 3mf for a nicer print.  

The main 14mm spacer requires four M2.5 X 50mm long screws.  I used these, they work great! 
https://amzn.to/3Nn1sxW

The wedge requires 2 M3 X 4mm long flat head screws or whatever you find that fits flush. 
I threw some tape on the back of the drive so it does not short against the screw, case or wifi antennas.

FreeCAD files of the spacer and wedge are included as well as step files of everything. 


The little server is just awesome now! 

Tagi