Roborock F25 ACE Combo – Wall Mount for Handheld Vacuum (v2)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall Mount for Handheld Vacuum
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 258
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial
Update v2 – redesigned mount
The mount has been completely reworked. Same fit, same screw holes – but lighter, sturdier and better looking.
New skeleton design with a large window in the cradle – less material, more modern look
Rounded edges everywhere, smooth fillet between cradle and wall plate for more strength
Deeper recess for the air outlet (6 mm) – the vacuum now rests properly on the ring
Countersunk screw holes (for 5 mm countersunk screws)
Chamfered edges on the nozzle opening
Screw hole positions unchanged – you can swap the old mount without drilling new holes
The original version is still available in the files.
This is my custom wall mount for the handheld vacuum of the Roborock F25 ACE Combo.
It’s my very first 3D model – not perfect, but it does the job and holds the vacuum securely on the wall.
For mounting the accessories (nozzles, brushes, etc.) I intentionally used the proven Roborock H7 accessory holders, because they also fit perfectly with the F25 accessories.
This keeps everything compatible and easy to extend.