P
PrintablesQUADMULA
QUADMULA Djinn F25 Split
3D print file for QUADMULA Djinn F25
- Pobrania
- 829
- Polubienia
- 16
- Ocena
- 5
Wyniki wyszukiwania: f25
Liczymy pasujące modele…
P
PrintablesQUADMULA
QUADMULA Djinn F25 SP
3D print file for QUADMULA Djinn F25 SP *The parts of Djinn F25 SP and Djinn F25 Split are completely incompatible. TPU BlackishGreen - Link
- Pobrania
- 620
- Polubienia
- 36
- Ocena
- 0
P
PrintablesZane Thomas
1/24 Scale 1996 Ford F250 for Axial Crawler Body
1/24 Scale 1996 Ford F250 for Axial Crawler Body
- Pobrania
- 482
- Polubienia
- 52
- Ocena
- 0
P
PrintablesSamet Muric
BMW X3 F25 Headlight Washer Cover
There was only left, I drew right and left. Not tested. Maybe a few corrections needed.
- Pobrania
- 208
- Polubienia
- 8
- Ocena
- 0
P
PrintablesGeddy
Spool hub for Snapmaker 2.0 (A350/A250/F250/F350/...)
Spool hub and side wheel - keeps the filament spool in place and stable, ensures consistent easy rotation as the printer head moves. This should be compatible with most if not all Snapmaker printers that have spool arm design as in…
- Pobrania
- 198
- Polubienia
- 32
- Ocena
- 0
P
PrintablesTrey Spooner
F150, F250, Expedition Vent Extension (2015-2024)
This extension tube goes under the front seat of an F-150, F-250, F-350, or Ford Expedition. This extends the vent further to the rear seat for better airflow.
- Pobrania
- 191
- Polubienia
- 26
- Ocena
- 0
P
PrintablesNick L
2013-2016 Ford F250 F350 Superduty Magnetic Phone Mount
I created this mount for my 2013 F-350. It is designed with a recess for 4 BC63 (3/4" x 3/8" x 3/16" thick) neodymium magnets. I epoxied (I used JBWeld) them into place and attached a piece of sticky backed rubber over them to provide a…
- Pobrania
- 191
- Polubienia
- 32
- Ocena
- 5
P
Printablesma7moodz
Honda CRF250R 2025 Air Filter Cover CRF450
An Air filter cover for the Honda CRF250R, to protect it from water during washing and from dust during long term storage or transportation. Its designed with a long lip in case you wanted to add any sort of sealing material like window…
- Pobrania
- 161
- Polubienia
- 11
- Ocena
- 0
P
PrintablesPaulius Butkevicius
Honda CRF250L Radiator protector
Grills to protect CRF250L radiator from mud and small stones.
- Pobrania
- 140
- Polubienia
- 29
- Ocena
- 5
P
PrintablesHryhorii S
GPS M10 mini mount QUADMULA Djinn F25
It's a mount for GPS on M10 chip in mini formfactor. FlyfishRC GPS M10 mini fits well
- Pobrania
- 132
- Polubienia
- 5
- Ocena
- 5
P
Printablesmscho24
osVAC Neo Adapter F25-H20
This is an adapter from a osVAC Neo 25mm female connector to a 20x4mm hose. The adapter allows the hose to rotate freely. ATTENTION: This is for the osVAC 25mm system and not the more common 32mm system. I created this adapter for the…
- Pobrania
- 131
- Polubienia
- 14
- Ocena
- 5
P
PrintablesScottmi
Glow Plug Guide Tool 2008 Ford F250 6.4L
Glow Plug Sleeve for changing glow plugs on a 2008 Ford Super Duty 6.4L diesel engine. Works great. I would not change a glow plug without one. It is a very simple cylinder with a flange, easily sketched from scratch. AA battery included…
- Pobrania
- 95
- Polubienia
- 8
- Ocena
- 5
P
PrintablesAKC170B
OBS Ford Hood Bumper fits 1992-1996 Bronco, F150, F250, F350
I needed a rubber bumper for my OBS F350 hood so I copied one. I printed with Overture TPU with 3 walls and 15% cubic infill. It was a little soft so I would probably try 4 walls and 20% infill. 6 walls and 25% was too much.
- Pobrania
- 91
- Polubienia
- 28
- Ocena
- 0
P
PrintablesLuke D'Angelo
2011-2016 F250 Super Duty Can Holder inserts
Was tired of my soda cans or any cans of that nature flopping around in the one size fits all insert that ford has inside their inserts for the center console. Couldn't find anything remotely close or anything for my truck so I decided to…
- Pobrania
- 90
- Polubienia
- 24
- Ocena
- 0
P
PrintablesSquidVicious
Dash Insert Phone Holder for Ford F250
This is an insert for the recessed area on the dash on a 2013 F250. It provides a flat surface to mount a stand for your phone. Corner stands are included, but are designed for my phone case. The corner mounts should be easy enough to…
- Pobrania
- 88
- Polubienia
- 20
- Ocena
- 0
P
PrintablesFitangano
BMW X3 F25 center console tray
This is a simple divider to make a small pocket in the center console. Glue it with double sided clear tape or hot glue to avoid damage to the original part. Note: please check the center console shape due to different versions. Print at…
- Pobrania
- 88
- Polubienia
- 13
- Ocena
- 0
P
PrintablesPistonPin
SKF fork seal driver for CRF250L
The fork seal of the left hand fork leg on my CRF250L was leaking and needed to be replaced. I bought a fork seal driver, but the gap between the tool and the fork tube was so small, that I was worried I might scar the surface.…
- Pobrania
- 79
- Polubienia
- 21
- Ocena
- 0
P
PrintablesPeckroth1966
92-97 Ford F250 Cup holder
cup holder for 92-97 F250 center console
- Pobrania
- 76
- Polubienia
- 3
- Ocena
- 0
P
PrintablesKarolNI
Sofirn IF25A flashlight gopro mount
Gopro mount for sofirn IF25A flashlight. Fits tightly around the flashlight. Can be used with upto 20mm wide velcro strap. Printable without supports
- Pobrania
- 74
- Polubienia
- 8
- Ocena
- 0
P
Printablesbosstang
Dome Light Lens Ford 1980-1997 F250
I didn't care for the dingy, yellowed dome light lens in my F250, so I made a new one. This should fit 1980-1997. Also included a plain one to fit various 1980-1997 Ford, Lincoln, and Mercury dome lights.
- Pobrania
- 74
- Polubienia
- 13
- Ocena
- 0
P
PrintablesFdoepke
Honda CRF250F and CRF125F Muffler Plug
These plugs fit a 2022 Honda CRF250F and CRF125F Muffler so you can power wash the bike without flooding the exhaust. I printed them in TPU with 4 perimeters which may be slight overkill but I didn't want them to break in the muffler.
- Pobrania
- 69
- Polubienia
- 13
- Ocena
- 5
P
PrintablesPB1302
Ford F250 Tailgate Camera Relocation Box
Needed a box to house my camera since I removed my tailgate from my 2022 F250 so I could put my slide-in camper in. I removed the camera from the tailgate handle area (not so easy but doable) and made a box using Fusion 360 to accommodate…
- Pobrania
- 64
- Polubienia
- 10
- Ocena
- 0
P
PrintablesG0r0detsky
Ford F150 F250 Truck Bed Accessory Caps
This fits perfectly on my 2011 F250 as well as the 2024 F150 bed posts. After a 500+ mile trip they have stayed in with .4 layer height 50% infill
- Pobrania
- 63
- Polubienia
- 20
- Ocena
- 0
P
PrintablesDeamer
gauge pod F250
here's a 52mm gauge pod my son asked for to install in his F250. It mounts on the A pillar lower handle bolt, so no drilling required. i did change the bolt to an internal drive bolt(i used a torx) as your 10mm socket will not fit inside…
- Pobrania
- 63
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKing Kalu (卢卡)
Polymaker Fiberon PA6-GF25 Print Settings
Print Settings for glass filled nylon.
- Pobrania
- 60
- Polubienia
- 6
- Ocena
- 0
P
PrintablesTOKENIZER
osVAC neo F25H32-withSlipring + step + Fusion 360
osVAC neo M40H40-withSlipring + step + Fusion 360 I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist…
- Pobrania
- 58
- Polubienia
- 5
- Ocena
- 0
P
PrintablesGERBOX
Garmin Edge Mount for Syncros ST-R100 - PA6-GF25 Optimized
This is a high-performance, integrated Garmin mount specifically designed for the Syncros ST-R100-AL stem. It mounts directly under the stem faceplate for a clean, aerodynamic "pro-cockpit" look. The geometry is specifically optimized for…
- Pobrania
- 55
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTOKENIZER
osVAC neo F25 + step + Fusion 360
F25 female adapter I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist hier:…
- Pobrania
- 46
- Polubienia
- 4
- Ocena
- 0
P
PrintablesKruscle
Shark DuoClean IF250 Attachment Mount
Wanted a convenient place for our Vacuum attachments, so whipped this up real quick! Convenient slots for both the included crevice and brush tools. Should fit any vacuum with a 33mm diameter shaft, but your results may vary, .STEP files…
- Pobrania
- 43
- Polubienia
- 2
- Ocena
- 5
P
PrintablesTOKENIZER
M32F25 + step + Fusion 360
M32F25 + step + Fusion 360 I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist hier:…
- Pobrania
- 43
- Polubienia
- 7
- Ocena
- 0
P
PrintablesTOKENIZER
osVAC neo F25H27-withSlipring + step + Fusion 360
F25H27. Is smaller than osVAC-original. I did bring osVAC to Fusion 360. The link to the latest version of the files can be found here: Ich habe osVAC in Fusion 360 nachgebaut. Der Verweis auf die immer aktuellste Version ist hier:…
- Pobrania
- 43
- Polubienia
- 6
- Ocena
- 0
P
PrintablesKarolNI
Sofirn IF25A handlebar mount Ø22.2/31.8mm
Handlebar mount for Sofirn IF25A flashlight Necessary parts: M5 bolt - DIN912 (length: 12-16mm for Ø22.2 version | 14-18mm for Ø31.8 version) M5 hex nut - DIN934 or M5 square nut - DIN557 (files available in 2 versions) velcro strap or…
- Pobrania
- 35
- Polubienia
- 11
- Ocena
- 5
P
PrintablesBrian Mcgriff
Ford F250 Dashboard Storage & Samsung Z Fold 4 Phone Holder
Ford Dashboard Storage & Samsung Z Fold 4 Phone Holder
- Pobrania
- 33
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMizMods
2012 Ford F250 Grab Handle
2012 Ford F250 Grab handle. My coworker slipped and ripped the handle off the original. It'll mount to the metal bracket that was originally in place. You'll need: Washers for the middle 3 mounting holes to space them properly(I may…
- Pobrania
- 33
- Polubienia
- 2
- Ocena
- 0
P
PrintablesOrcalk
Aprilia Tuareg 660 Tank Adapter (for Givi BF25)
This adapter is specifically designed to make the Givi BF25 tank lock system compatible with the Aprilia Tuareg 660 . It serves as a bridge between the bike's tank and the Givi flange. ⚠ IMPORTANT INSTALLATION NOTES: Screws: To install…
- Pobrania
- 32
- Polubienia
- 1
- Ocena
- 0
P
Printablesjferris11115
F250 Cupholder insert for Yeti tumblers
Cupholder insert for '11 - '15 F250 trucks that fits 32oz Yeti tumblers Printed in TPU, tree supports on build plate only.
- Pobrania
- 32
- Polubienia
- 5
- Ocena
- 0
P
PrintablesLorenzo Chapa
1999-2003 f250 f350 shock bushing
A replacement bushing for ford pickup trucks 250-350s 1999-2003 made using TPU With a .8mm nozzle and 100percent infill. I Used a little oil around the opening and worked it until I was able to press it in.
- Pobrania
- 31
- Polubienia
- 8
- Ocena
- 0
P
Printableschiefgeek
F250 Sync Bracket
Upgrading from a sync 2 to sync 3 system the sync 2 bracket would not work because the sync 3 system is wider (sync 2 is a recessed screen). I printed in ABS to deal with the heat of a closed vehicle in souther 100+ degree summer days.…
- Pobrania
- 30
- Polubienia
- 2
- Ocena
- 0
P
Printablesinfinity0911
Roborock F25 ACE Combo – Wall Mount for Handheld Vacuum (v2)
Update v2 – redesigned mount The mount has been completely reworked. Same fit, same screw holes – but lighter, sturdier and better looking. New skeleton design with a large window in the cradle – less material, more modern look Rounded…
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 0
P
Printablesuser35007
2014- Ford F250 Cubby drawer
2014- Ford F250 Cubby drawer
- Pobrania
- 28
- Polubienia
- 5
- Ocena
- 0
P
Printableswarwickh
CRF250x CRF450x Speedometer Gear
Print at 100% infill. May need supports.
- Pobrania
- 27
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRomain
Fume Extractor activated carbon - Additional filter for Vevor XF250 & XF180
A fume extractor filters harmful fumes created by soldering or other processes. When soldering, fumes are created by the heated flux. They contain VOCs and gases that are harmful. Activated carbon filters are used to capture these by a…
- Pobrania
- 25
- Polubienia
- 7
- Ocena
- 0
P
PrintablesPorscheAmateur
CRF250X Fork Stopper Tool
CRF250X Fork Stopper Tool as dimensioned in the factory service manual Print Settings Printer: Artillery Sidewinder X1 V4 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Inland PLA Gray Category: Automotive
- Pobrania
- 25
- Polubienia
- 0
- Ocena
- 0
P
PrintablesTheHamburglar
KF25 Oil Mist Filter
I needed an oil mist filter for my vacuum pump while waiting on an actual proper one. So I put this together in an afternoon. The idea is that there is no path for oil droplets to splash out, and the oil mist has to go through the top…
- Pobrania
- 24
- Polubienia
- 3
- Ocena
- 0
P
Printablesma7moodz
Runleader Tachometer Temperature mount for 8mm bolt Honda CRF250R CRF450R
This is a mount for the Runleader RL-HM035A Tachometer/Temperature gauge, it should work on other Runleader models in case it has the same mounting points. It attaches to any 8mm bolt it was tested on a CRF250R 2025.
- Pobrania
- 22
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSteph360
F250 Center Console Organizer Insert
F250 Center Console Organizer Insert for 2017-2020 (possibly more) Ford F250 truck with bench seat upper storage locker. V1 I made more specific to what I have in my console. V2 I designed based off of V1 for more general needs. Printed…
- Pobrania
- 22
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSisterlimonpot
XF150 & XF250 Bracket Assembly L and R
This is the bracket assembly for the OLD version XF150 and XF250. It has to be printed in 3 parts and superglued in order to get the desired layer strength. The glue joints are obvious and indexing tabs have been added to unsure overall…
- Pobrania
- 19
- Polubienia
- 1
- Ocena
- 0
P
Printablesitguru
Klimaflex kf25 Flügelabdeckung
The “Bopel” needs to be pressed with force into “BasePlaneHole” part, to get the final part. All parts can be printed without supports. I have used PETG (Prusament). The head diameter of the screws must be filed down to 6 mm (preferably…
- Pobrania
- 18
- Polubienia
- 0
- Ocena
- 0
P
PrintablesMizMods
2011/(12?) Ford F250
Title says all. If I was to remake it, I'd adjust the angle of the shaft a little but it is functional.
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPrintfessor
Honda CRF250L Handle Bar Mount for Trail Tech Vapor with Protective Cover
This is a handlebar mount for a Honda CRF250L motorcylce to hold a Trail Tech Vapor tachometer. I printed this on a Bambu Lab X1C Carbon. The model was made with Freecad from scratch. I printed using PA6 CF filament which I dried for 24…
- Pobrania
- 12
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAquarius
osVAC neo Adapter F32 - F25
This adapter connects osVAC neo Female (F) 32 to Female (F) 25 , and vice versa. osVAC neo: https://osvacneo.de https://www.woodworker.de/forum/forums/3d-druck.47/
- Pobrania
- 12
- Polubienia
- 2
- Ocena
- 0
P
PrintablesChris vK
Cap for Philips Avent Bottle Warmer / Deckel für Falschenwärmer SCF255
We are using a Philips Avent SCF255 to heat up baba pulp or keep milk warm. Unfortunately there is no cap to close the warmer and prevent it from dust and other dirt, while you don't use it. In the past we used a kitchen towel... With my…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 5
P
PrintablesAMerican_Car_LOver
Lifted F250
Pulled the fender flares of Thingiverse, supercharger also off of Thingiverse, the rest is a remix.
- Pobrania
- 10
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMike D
2017 F250 Replacement Microphone Holder for Stock Location
I replaced the factory stereo in my 2017 F250 (Sync 1 w/ 4in screen). I used a Tesla-style Android head unit with the 12 in screen. The built-in microphone (as well as the replacement mic they give you) is terrible, no one could…
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
PrintablesSovol SV08
BMW X3 F25 Ball Joint Tool
This tool is a lifesaver when the ball joints on a BMW X3 are so heavily rusted that they won't budge using standard methods. I designed this helper tool based on the exact dimensions of the replacement part to ensure a perfect fit. How…
- Pobrania
- 9
- Polubienia
- 1
- Ocena
- 0
P
Printablesjustme
Blind KF10 - KF16 - KF25 - KF40 - KF50
I’ve made a blind cap in various KF sizes. The blind caps fit perfectly. Because the surface isn’t perfectly smooth after printing, these blind caps aren’t suitable for vacuum applications. As shown in the photo with a turbo pump, the…
- Pobrania
- 9
- Polubienia
- 0
- Ocena
- 0
P
PrintablesLegitRisk
7th Gen Ford F150 F250 F350 F450 F550 F650 License Plate Clip(Compatible with)
Today I had an F650 come into the shop that was missing the lower 2 license plate clips, decided to design and print some up when I was on lunch using a factory clip as a reference. I designed the 5mm hole one originally because I wasn't…
- Pobrania
- 7
- Polubienia
- 2
- Ocena
- 0
P
PrintablesWingSmith Drones
Quadmula F25 SP
This set of files is for the Quadmula F25 SP. This set of files is intended to compliment the Quadmula arm guards, and camera cages. All components are official WingSmith designs. Please provide feedback for requests and changes for…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
Printablesrob911sc
Triumph TF250-E Tail Scan
Scan of a Triumph FT250-E and TF450-E Tail light combo I'm using this scan to create a custom license plate mount for my enduro bike.
- Pobrania
- 4
- Polubienia
- 3
- Ocena
- 0
P
Printablesrob911sc
TF250-E / TF450-E Dual Sport Plate Holder
This is a plate holder with mounting points for the triumph light kit. I highly recommend making this out of TPU so that any impacts to the holder will only bend the plate. you will need: 2 M5 x 45mm bolts - Top holder mount 1 M5 x 20mm…
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
PrintablespZq
Xtool P2S F25.4 / F1" & F38.1 / F1.5" nozzle
[UPDATES] Print Nozzle by rotating (absolute) Z=180 and Y=60 degrees When printing like this, there is no need to file or sand or carve anything. Just print and use. Updated xy compensation from -0.1 to 0 A nozzle for Xtool P2S that…
- Pobrania
- 2
- Polubienia
- 1
- Ocena
- 5
P
PrintablesTemocMeza
Fenix - WF25RM & PD36R
Gridfinity holder for both of the flashlights (WF25RM & PD36R) keep it nice and tight inside your toolbox.
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
Printables
QUADMULA Djinn F25 SP
3D print file for QUADMULA Djinn F25 SP *The parts of Djinn F25 SP and Djinn F25 Split are completely incompatible. TPU BlackishGreen - Link
P
Printables
Aprilia Tuareg 660 Tank Adapter (for Givi BF25)
This adapter is specifically designed to make the Givi BF25 tank lock system compatible with the Aprilia Tuareg 660 . It serves as a bridge between the bike's tank and the Givi flange. ⚠ IMPORTANT INSTALLATION NOTES: Screws: To install…
P
Printables
Garmin Edge Mount for Syncros ST-R100 - PA6-GF25 Optimized
This is a high-performance, integrated Garmin mount specifically designed for the Syncros ST-R100-AL stem. It mounts directly under the stem faceplate for a clean, aerodynamic "pro-cockpit" look. The geometry is specifically optimized for…
P
Printables
Blind KF10 - KF16 - KF25 - KF40 - KF50
I’ve made a blind cap in various KF sizes. The blind caps fit perfectly. Because the surface isn’t perfectly smooth after printing, these blind caps aren’t suitable for vacuum applications. As shown in the photo with a turbo pump, the…
P
Printables
osVAC neo Adapter F32 - F25
This adapter connects osVAC neo Female (F) 32 to Female (F) 25 , and vice versa. osVAC neo: https://osvacneo.de https://www.woodworker.de/forum/forums/3d-druck.47/
P
Printables
Fenix - WF25RM & PD36R
Gridfinity holder for both of the flashlights (WF25RM & PD36R) keep it nice and tight inside your toolbox.
P
Printables
2011/(12?) Ford F250
Title says all. If I was to remake it, I'd adjust the angle of the shaft a little but it is functional.
P
Printables
CRF250L Phone Battery Holder
This model is designed to mount to the handlebars of a Honda CRF250L dirt bike and hold a ryobi battery for charging your phone. The battery is https://www.ryobitools.com/products/details/33287213603 and should fit snugly into the spot.…
P
Printablesjohn mcalpine
Ford E250 E350 e450 f150 F250 F350 Android Headunit mount adapter
Pimp my box truck lol. Designed to adapt this super slick 10.1" android head unit with dual knobs to the old ford hole. Get a factory quality infotainment retrofit on a budget. This dash and radio commonly found on many motorhomes, work…
- Polubienia
- 5
- Ocena
- 0
P
Printables
BMW X3 F25 Center Console Wireless Charging Tray
MagSafe wireless charging tray for 2011-2017 BMW X3 (F25). Original model was made for an iPhone 14 Pro Max, so should fit phones up to that size. I use an iPhone 12 Pro so there's plenty of room. I included the original (made for an…
P
Printables
ford truck f250
It prints with supports when it is done printing it is easier than when it cools.
P
Printables
89-97 F250 Door handle reinforcement v1
So my handles broke and couldn't find a solution. Found one guy selling these and made my own. Abs was a little flexible at this thickness so i wound up using pla+. Dimensions are pretty much set so i wouldn't try to scale it. 100% infill…
P
Printables
BMW X3 (F25) Phone holder replacement box
Phone holder replacement box to fill the gap left after removing the phone holder on the arm rest support
P
Printables
BMW X3 F25 oil drain plug cap
Car was missing oil drain plug cap, never had it, so I designed it. I consider it a nice fit. You will need BMW lower U nut hex screws, found on ebay. Printed in gray PETG, painted black.
P
Printables
Honda CRF250L CRF250 radiator fan holder
Honda CRF250L radiator fan holder (incase you broke yours).
P
Printables
KF25 adapter for Vacuum pump air filter
This is an KF25 flange adapter for oil mist air filters to a M30x1.5 metric thread. It is designed for use with the 9CFM vacuum pump from Vevor. It is designed to be compatible with KF25 style sealing/clamp. I provided the model in a…